Home > VPWS

Alcatel-Lucent Service Router Service Configuration Preparation

Network Preparation In the first part of this article series we talked about service terms and some steps about service creation and the preparing the network for service creation. Here, in this article, we will talk about the practical configuration of the network before service configuration. All these steps in this article are as a […]

Alcatel-Lucent L2 VPN and L3 VPN Services – Part 2 (Service Types)

Archived in the category: Alcatel-Lucent, IES, Services, VPLS, VPRN, VPWS
Posted by gokhankosem on 16 Apr 15 - 8 Comments
Alcatel-Lucent, Logical View of IES

Alcatel-Lucent L2 VPN and L3 VPN Service Types In this article we will talk about Service types used in Alcatel-Lucent Service Routers. Why Alcatel-Lucent use “Service Router” term for their service routers? This is because, different services to customers are given on these routers. Services that are given with Service Routers can be divided to […]

Alcatel-Lucent Service Routers,Service Logic, P Routers, PE Routers

Service Terms and Service Creation Steps Service perspective is a Alcatel-Lucent‘s view for providing internet and VPN services to the customers. There are many services in Alcatel-Lucent Service Routers. For this services some configurations must be done under Alcatel-Lucent Service Routers. As a beginning learning some service related terms use din Alcatel-Lucent Service Routers will […]

Alcatel-Lucent E-pipe, A-pipe, C-pipe, F-pipe Service Logic

config>service # fpipe 1 customer 6 create Router>config>service>fpipe # description “fpipe service” Router>config>service>fpipe # sap 1/1/1:30 create Router>config>service>fpipe>sap # no shutdown Router>config>service>fpipe>sap # exit Router>config>service>fpipe # spoke-sdp 10:111 Router>config>service>fpipe>spoke-sdp # exit A-Pipe Apipe, is the VPWS service that provides a point-to-point ATM service between two nodes on IP/MPLS network. In Apipe configuration, the general steps […]

VPWS (Virtual Private Wire Service) – Part 2 (Epipe Configuration)

Archived in the category: Alcatel-Lucent, Services, VPWS
Posted by gokhankosem on 16 Apr 15 - 8 Comments
Alcatel-Lucent VPWS Service Logic

Epipe Configuration In the previous part we have talked about the VPWS service of Alcatel-Lucent. In this article we will focus on the configuration of the VPWS Service on Alcatel-Lucent devices. As you know, there are types of VPWS. Epipe, Fpipe, Apipe, Cpipe and Ipipe are these types. The most important and widely used is […]


Copy Protected by Chetan's WP-Copyprotect.