Home > CCIE

ipv6-static-route-ipcisco-2

IPv6 Static and Default Route Configuration on Cisco IOS IPv6 Static Route Configuration on Cisco IOS As you know, static route is the route that you manually define on a router.This is done when we do not want to use Routing Protocols for small part of a network. Or, in large networks some small amout […]

OSPFv3 Configuration Example on Cisco IOS

Posted by gokhankosem on 26 Sep 17 - 0 Comments

OSPFv3 Configuration Example on Cisco IOS OSPFv3 is the IPv6 cabaple version of OSPF. The previous version of OSPF was OSPFv2. OSPFv2 is for IPv4. Here, we will configure OSPFv3 for the below topology. As you can see, there are three areas and six routers in this topology. For OSPFv3 configuration, we will follow the […]

ISIS Configuration Example on Cisco IOS

Posted by gokhankosem on 26 Sep 17 - 0 Comments
isis-topology-ipcisco-2

ISIS Configuration Example on Cisco IOS In this Cisco ISIS configuration example, we will configure an ISIS domain and see how to establish ISIS Routing. For our example we will use the below four-routered topology. Here, we will have 3 different area. We are using multi area model to show you the link level configurations. […]

Extended acl with packet tracer

Extended Access Lists Configuration With Packet Tracer In this lesson we will focus on Extended ACL Configuration with Packet Tracer. We will use the below topology for our packet tracer configuration. You can DOWNLOAD the Packet Tracer example with .pkt format HERE. Like Standard ACL configuration example, we will use one router, one destination server […]

standard acl configuration packet tracer

Standard Access List Configuration With Packet Tracer In this lsson we will see the standart access list and how to configure standart access list in Packet Tracer. There are three types Access Lists in common. Thse access list types are : – Standard Access List – Extended Access List – Named Access List You can […]


Copy Protected by Chetan's WP-Copyprotect.