Home > CCNP SP

VPLS Labelling (Tunnel and Service Labels) As we discussed in the MPLS articles before, for MPLS we need labels. VPLS is also a MPLS Service, so we need to use labels in VPLS too. There are two MPLS labels used in VPLS. These labels are: • Outher Label (Transport Label) • Inner Label (Servise Label […]

vpls-mac-learning-

VPLS MAC Learning VPLS is a Leyer 2 VPN technology. Becuase of its Layer 2 nature, “MAC Learning” is very important for VPLS. So, how does VPLS learn MAC Addresses? MAC Learning in VPLS is similar to normal switching MAC Learning. The concept is basic. At the beginning nobody knows the others. So, to send […]

vpls-topologies-hierarchical-

VPLS Topologies VPLS can be defined on One Service Router or on Multiple Service Routers. Basically we can divide VPLS into two here. The first one is VPLS, that is defined on one Service Router of Service Provider, by using router ports only. As Alcatel-Lucent (Nokia) translation, this type of VPLS is done only by […]

isis-topology-2

IS-IS versus OSPF IS-IS Protocol and OSPF have some similarities and differences. Lets firstly check the similarities of these two protocol one by one: – IS-IS Protocol and OSPF are both Link-State Interior Gateway Protocols. – IS-IS Protocol and OSPF are both uses Dijkstra SPF (Shortest Path First) algorithm. – These protocols have LSDBs and […]

IS-IS Adjacency States, IS-IS Neighbourship Establishment

IS-IS Protocol Adjacency There are three types adjacency in IS-IS Protocol.These are: – Level 1 routers form L1 adjacency with L1 and L1/2 Routers – Level 2 routers form L2 adjacency with L2 and L1/2 Routers – Level 1/2 routers form L1/2 adjacency with L1/2 Routers There is no neighbourship between L1 and L2 routers. […]


Copy Protected by Chetan's WP-Copyprotect.