Home > Network Management

Alcatel-Lucent, 5620 SAM Screenshot Example

Alcatel-Lucent 5620 SAM (Service Avare Manager) Alcatel-Lucent 5620 Service Aware Manager (SAM) is the network and service management application of Alcatel-Lucent. It is generally used on service providers’s big netwoks consist of Alcatel-Lucent devices like 7750 SR, 7450 ESS and so on. Alcatel-Lucent 5620 Service Aware Manager (SAM) uses SNMPv2 and SNMPv3 to do this […]

SNMP Configuration On Juniper Junos We begin the SNMP configuration with Cisco devices and here, we will continue how to configure a Juniper device for SNMP. In this article we will not mention all the parameters deeply like in the before article. We will check the difference of Juniper JUNOS configuration than Cisco IOS. First […]

SNMP (Simple Network Management Protocol) SNMP (Simple Network Management Protocol) is a network management protocol that works in application layer of OSI model. It provides the message format between the manager device and the controlled device. Basically SNMP provides monitoring and management of the devices in a network. SNMP consist of three parts: – SNMP […]

Configuration On Cisco IOS In this article series we will talk about SNMP configuration for three wellknown network device vendors’ devices. This vendors are Cisco, Juniper and Alcatel-Lucent as you know. In this first part, we will see how the snmp configuration can be done if our SNMP Agent device is a Cisco device. In […]

SNMP Configuration on Cisco Routers

Archived in the category: Network Management, SNMP
Posted by gokhankosem on 30 Mar 12 - 0 Comments

SNMP Configuration Commands for Cisco Routers         There are a number of commands can be used to configure SNMP on a Cisco device. Some of these commands are required although some are optional. The required ones are mentioned below: Router(config)# snmp-server community string [view view-name] [ro | rw] [number] Router(config)# snmp-server group […]

Copy Protected by Chetan's WP-Copyprotect.