Home > VLAN

How to Configure Cisco VLANs To Configure Cisco VLAN, firstly create the VLAN with the VLAN ID and then give it a name; (The standard VLAN number range is 1 to 1005. 1002 to 1005 is reserved for Token Ring and FDDI.And lastly 1006 to 4094 range is used by VTP transparent mode) Switch A […]

VLAN – Part 3 (DTP and VLAN Frame Tagging protocols ISL, dot1.q)

Posted by gokhankosem on 04 Oct 15 - Comments Off on VLAN – Part 3 (DTP and VLAN Frame Tagging protocols ISL, dot1.q)
vlan frame tagging protocols, ISL and Dot1q

DTP (Dynamic Trunking Protocol) and VLAN Frame Tagging Protocols (ISL and dot1.q) LAN Frame Tagging Protocols (ISL and dot1.q) There are two types of frame tagging protocols. These are : – ISL(Inter-Switch Link) – dot1Q (or IEEE 802.1Q) These protocols can be configured manually or negotiated by DTP(Dynamic Trunking Protocol). DTP is a Cisco proprietary […]

vlan(virtual local area network) port assignment

VLAN Port Assignment VLANs can be assigned statically and dynamically. Static configuration is more common, but dynamic is also used. Static VLAN assignment is like its name. You will statically assign the ports to the VLAN. Dynamic VLAN assignment can be done by VLAN Membership Policy Server(VMPS). VMPS needs VLAN-MAC address relationship database. Here, we […]

vlan(virtual local area network)

VLANs (Virtual Local Area Networks) VLANs(Virtual Local Area Networks) are the virtual networks that you can seperate big networks into smaller networks. This can be done for reducing broadcast traffic, network performance improvement, security purpose or to seperate different departments each other and for network flexibility. Basically VLAN (Virtual Local Area Network) VLANs are logical […]

VLAN Mapping (VLAN Translation) – Part 3 (Juniper JUNOS)

Archived in the category: Juniper, Switching, VLAN
Posted by gokhankosem on 10 Feb 15 - 0 Comments
vlan mapping (translation) single tag

VLAN Translation on Juniper JUNOS On Juniper devices, VLAN translation term is used for mentioning the swap of incoming VLAN id to a new VLAN id. In the below configuration examples, we will do this job on Juniper devices. In the first example, we will swap the incoming VLAN 60 tag with the new VLAN […]


Copy Protected by Chetan's WP-Copyprotect.