Private VLAN Configuration Example


Private VLAN Cisco Configuration Example

For Private VLAN configuration, we will do a configuration example with one switch and one router. Here, we will use the same topology that we have used before for Private VLAN overview. Our topology, ports and VLANs will be like below:


We will do the below Configuration on the Switch, one by one.

1. Set VTP Mode as “Transparent Mode”.

The first step is determination of the VTP Mode of the switch. It must be in “Transparent Mode”.

IPCisco# config terminal
IPCisco(config)# vtp mode transparent

2. Secondary VLANs Creation.

Secondly, we will create the Secondary VLANs.

IPCisco(config)# vlan 101 
IPCisco(config-vlan)# private-vlan community 
IPCisco(config-vlan)# end
IPCisco(config)# vlan 102 
IPCisco(config-vlan)# private-vlan community 
IPCisco(config-vlan)# end
IPCisco(config)# vlan 103
IPCisco(config-vlan)# private-vlan isolated 
IPCisco(config-vlan)# end

3. Primary VLAN Creation.

In the step three, we will create Primary VLAN.

IPCisco(config)# vlan 100 
IPCisco(config-vlan)# private-vlan primary 
IPCisco(config-vlan)# end

We're Sorry!

Full Access is for only IPCisco Crew...

With IPCisco Membership, You Can Access:

• All Certification Courses (Cisco, Juniper, Nokia and Huawei),
• Thousands of Questions (Lesson Quizes and Special Quiz Section),
• Carieer Consultancy, CV/Resume Check, Career Advice Meeting,
• Cheat Sheets, Job Interview Trainings, Network Tools,
You will be Member of a Big IPCisco Community,
You will Learn Network Lessons with Always,
New And Different Learning Styles!
We are waiting for you!

Lesson tags: VLANs, private vlans
Back to: CCIE > Private VLANs

Comments are closed.