JNCIP Quiz 1

JNCIP QUIZ 1

CONGRATULATIONS!

YOU HAVE COMPLETED JNCIP QUIZ 1.

YOU HAVE %%SCORE%% TRUE ANSWERS OUT OF %%TOTAL%% QUESTIONS.

YOUR SCORE IS %%PERCENTAGE%%.

%%RATING%%

Your answers are highlighted below.
Question 1
Which ones are True for IGMPv3?
A
Report Suppression is supported
B
All of them
C
Used only with PIM SM
D
Report Suppression is not used
E
Specific Sources can be selected
Question 2
Switches sends .... each other to form STP databases.
A
BPDU
B
PDU
C
Bits
D
TCN
E
Packets
Question 3
How can we set Autonomous System Number as 64500 on JUNOS?
A
router autonomous-system 64500
B
set asn 64500
C
set autonomous-system 64500
D
set routing
E
edit routing-options
Question 4
In order, BGP states are :
A
Active, OpenSent, OpenConfirm, Established, Idle, Connect
B
OpenSent, OpenConfirm, Established, Idle, Connect, Active
C
Connect, OpenSent, OpenConfirm, Idle, Active, Established
D
Idle, Connect, Active, OpenSent, OpenConfirm, Established
E
Connect, OpenSent, OpenConfirm, Established, Idle, Active
Question 5
Which one is IPv6 specific? (Not used with IPv4)
A
Broadcast
B
None of them
C
Unicast
D
Multicast
E
Anycast
Question 6
How to enable MPLS on ge-1/1/1/ interface of a Juniper router?
A
edit protocols
B
set mpls interfaces ge-1/1/1 unit 0
C
set interfaces ge-1/1/1 unit 0 family mpls
D
set interfaces ge-1/1/1 unit 0 mpls
E
edit interfaces
Question 7
Which IPv6 address is similar to IPv4 public IP addresses?
A
Global Unicast
B
Link Local
C
Link Global
D
Unique Local
E
Unique Unicast
Question 8
Which ones are the main processes for QoS?
A
Selection
B
Differentiate
C
Classification
D
Association
E
Marking
Question 9
After the configuration, we use .... command for the configuration take place.
A
write
B
commit
C
verify
D
save
E
store
Question 10
How can we set root authentication as Plain Text?
A
set authentication plain-text-password
B
set aaa plain-text-password
C
set authentication password
D
edit system
E
set root-authentication plain-text-password
Question 11
In Layer 3 VPN, to distinguish different Customer's routes, .... are used.
A
BGP Tables
B
MAC Tables
C
ARP Tables
D
VRF Tables
E
IP Tables
Question 12
OSPF Topology database details can be displayed with ... command.
A
display ospf database info
B
show ospf database details
C
display ospf database
D
display ospf database details
E
show ospf details
Question 13
How can we check the redundancy of chassis of a Juniper router?
A
show hardware detail
B
show chassis redundancy
C
show system
D
show system detail
E
show redundancy
Question 14
In a LAG, if there will be less than the configured amouth of link, LAG become down. How can we configure this value as 5?
A
set aggregated links 5
B
set aggregated-ether-options minimum-links 5
C
set aggregated-ether minimum 5
D
set aggregated minimum-links 5
E
set ether-options minimum-links 5
Question 15
In which OSPF Neighborship Establishment state, DR and BDR selection is done?
A
2-Way
B
Exchange
C
Full
D
Down
E
Exstart
Question 16
Which ones are True about Multicast?
A
Unidirectional or bidirectional
B
Only Any-to-one
C
Routers do not forward multicast by default
D
Uninterested receivers can not refuse multicast packets
E
Simple switches forward multicast by default
Question 17
Under which context can we configure Route Distinguisher and Router Target for VPN Services?
A
System-options
B
Routing-options
C
Vpn-options
D
Routing-instance
E
Policy-options
Question 18
If Next Heder feild of an IPv6 Packet is ...., it is an IPv6 ICMP Packet.
A
60
B
58
C
59
D
56
E
57
Question 19
Which ones are the LSP types?
A
Dynamic LSPs
B
Static LSPs
C
RSVP-signaled LSPs
D
LDP-signaled LSPs
E
All of them
Question 20
How an we configure Loopback 0 NSAP Address?
A
edit lo0 unit 0 family iso
B
iso address 49.0055.2200.0000.1234.00
C
edit loopback family iso
D
edit interfaces lo0 unit 0 family iso
E
set address 49.0055.2200.0000.1234.00
Once you are finished, click the button below. Any items you have not completed will be marked incorrect. Get Results
There are 20 questions to complete.