JNCIP Quiz 1

JNCIP QUIZ 1

CONGRATULATIONS!

YOU HAVE COMPLETED JNCIP QUIZ 1.

YOU HAVE %%SCORE%% TRUE ANSWERS OUT OF %%TOTAL%% QUESTIONS.

YOUR SCORE IS %%PERCENTAGE%%.

%%RATING%%

Your answers are highlighted below.
Question 1
In order, BGP states are :
A
Active, OpenSent, OpenConfirm, Established, Idle, Connect
B
OpenSent, OpenConfirm, Established, Idle, Connect, Active
C
Idle, Connect, Active, OpenSent, OpenConfirm, Established
D
Connect, OpenSent, OpenConfirm, Idle, Active, Established
E
Connect, OpenSent, OpenConfirm, Established, Idle, Active
Question 2
How can we check the redundancy of chassis of a Juniper router?
A
show hardware detail
B
show system detail
C
show redundancy
D
show chassis redundancy
E
show system
Question 3
In a LAG, if there will be less than the configured amouth of link, LAG become down. How can we configure this value as 5?
A
set aggregated-ether minimum 5
B
set aggregated-ether-options minimum-links 5
C
set ether-options minimum-links 5
D
set aggregated links 5
E
set aggregated minimum-links 5
Question 4
OSPF Topology database details can be displayed with ... command.
A
display ospf database
B
show ospf database details
C
display ospf database details
D
show ospf details
E
display ospf database info
Question 5
How can we set root authentication as Plain Text?
A
set root-authentication plain-text-password
B
edit system
C
set authentication plain-text-password
D
set authentication password
E
set aaa plain-text-password
Question 6
Which one is IPv6 specific? (Not used with IPv4)
A
Unicast
B
None of them
C
Anycast
D
Multicast
E
Broadcast
Question 7
Switches sends .... each other to form STP databases.
A
Bits
B
Packets
C
PDU
D
TCN
E
BPDU
Question 8
Which ones are the LSP types?
A
LDP-signaled LSPs
B
Static LSPs
C
All of them
D
RSVP-signaled LSPs
E
Dynamic LSPs
Question 9
Under which context can we configure Route Distinguisher and Router Target for VPN Services?
A
Policy-options
B
Routing-instance
C
Vpn-options
D
Routing-options
E
System-options
Question 10
In Layer 3 VPN, to distinguish different Customer's routes, .... are used.
A
MAC Tables
B
IP Tables
C
VRF Tables
D
BGP Tables
E
ARP Tables
Question 11
How can we set Autonomous System Number as 64500 on JUNOS?
A
edit routing-options
B
set asn 64500
C
router autonomous-system 64500
D
set autonomous-system 64500
E
set routing
Question 12
Which ones are True for IGMPv3?
A
Specific Sources can be selected
B
All of them
C
Report Suppression is supported
D
Report Suppression is not used
E
Used only with PIM SM
Question 13
How an we configure Loopback 0 NSAP Address?
A
edit loopback family iso
B
set address 49.0055.2200.0000.1234.00
C
iso address 49.0055.2200.0000.1234.00
D
edit lo0 unit 0 family iso
E
edit interfaces lo0 unit 0 family iso
Question 14
Which IPv6 address is similar to IPv4 public IP addresses?
A
Global Unicast
B
Unique Unicast
C
Unique Local
D
Link Local
E
Link Global
Question 15
If Next Heder feild of an IPv6 Packet is ...., it is an IPv6 ICMP Packet.
A
58
B
59
C
57
D
56
E
60
Question 16
Which ones are True about Multicast?
A
Routers do not forward multicast by default
B
Simple switches forward multicast by default
C
Uninterested receivers can not refuse multicast packets
D
Unidirectional or bidirectional
E
Only Any-to-one
Question 17
In which OSPF Neighborship Establishment state, DR and BDR selection is done?
A
Full
B
Exstart
C
Exchange
D
Down
E
2-Way
Question 18
Which ones are the main processes for QoS?
A
Association
B
Selection
C
Marking
D
Classification
E
Differentiate
Question 19
How to enable MPLS on ge-1/1/1/ interface of a Juniper router?
A
set mpls interfaces ge-1/1/1 unit 0
B
set interfaces ge-1/1/1 unit 0 family mpls
C
edit interfaces
D
set interfaces ge-1/1/1 unit 0 mpls
E
edit protocols
Question 20
After the configuration, we use .... command for the configuration take place.
A
verify
B
write
C
store
D
save
E
commit
Once you are finished, click the button below. Any items you have not completed will be marked incorrect. Get Results
There are 20 questions to complete.