Basic Archives ⋆ Page 2 of 2 ⋆ IpCisco

MPLS Protection and Restoration – Part 11 (Juniper Configuration Samples)

March 12, 2015Posted by gokhankosemBasic, MPLS, Ciscoconfigurations, JUNOS, MPLS Protection and Restoration, mpls, juniper, protocols

One-to-one (fast reroute) backup Configuratio To enter edit mode… [edit] user@R1# edit protocols mpls To configure the LSP… [edit protocols mpls] user@R1# set label-switched-path lsp-path-name to address [edit protocols mpls] …

MPLS Protection and Restoration – Part 10 (Juniper Configuration Samples)

March 12, 2015Posted by gokhankosemBasic, MPLS, Cisconokia, protocols, configurations, MPLS Protection and Restoration, mpls, alcatel-lucent

One-to-one (Fast Reroute) configuration on JuNOS [edit] protocols { mpls { label-switched-path lsp-path-name { fast-reroute; } } } Many-to-one (Facility Backup) Link protection configuration on JuNOS [edit] protocols { rsvp …

SNMP Configuration on Cisco Routers

March 30, 2012Posted by gokhankosemBasicsnmp, Cisco, commands, Cisco IOS

There are a number of commands can be used to configure SNMP on a Cisco device. Some of these commands are required although some are optional. The required ones …

IP (Internet Protocol)

November 14, 2010Posted by gokhankosemBasic

IP is the primary netwok protocol that used for relaying packets across an internetwork. It is developed in the 1970s. In the network world it is commonly used with TCP(Transmission …

Basic

MPLS Protection and Restoration – Part 11 (Juniper Configuration Samples)

MPLS Protection and Restoration – Part 10 (Juniper Configuration Samples)

SNMP Configuration on Cisco Routers

IP (Internet Protocol)

IPCisco is the Winner of 2019 “Best Certification Study Journey” Category! We are also Finalist of 2020 & 2021 in Cisco IT Blog Awards!

IPCisco on Social Media!

Categories

Latest Blog Posts

WHAT YOU WILL FIND?

COURSES

SPECIALS

MEMBERSHIP