Here, in multipoint Frame-Relay configuration, we will use the same Cisco 3600 series routers and a frame relay switch. But here, our configuration will not be point-to-point only. Routers will …
AS you know Frame-Relay is a well-known WAN technology that generally used for backbone routers. To understand the basic configuration of Frame-Relay, there is a configuration below with three Cisco …
In this article we will focus on static route configuration on Juniper routers. Here, we will use Juniper JuNOS and we will be familiar with some JuNOS commands. The basic …
Beyond GPRS, EDGE(Enhanced Data rates for GSM Evolution) takes the cellular community one step closer to UMTS. It provides higher data rates than GPRS and introduces a new modulation scheme …
The evolution had started with additional of the packet switched network to the GSM network architecture. And this new technology called GPRS(General Packet Radio Service). It is also called 2,5G. …
