CCNA Quiz 9 ⋆ IpCisco

CCNA QUIZ 9

Please wait while the activity loads.
If this activity does not load, try refreshing your browser. Also, this page requires javascript. Please visit using a browser with javascript enabled.

If loading fails, click here to try again

CONGRATULATIONS!

YOU HAVE COMPLETED CCNA QUIZ 9.

YOU HAVE %%SCORE%% TRUE ANSWERS OUT OF %%TOTAL%% QUESTIONS.

YOUR SCORE IS %%PERCENTAGE%%.

%%RATING%%

Your answers are highlighted below.

Question 1

If we have a line "10.10.10.10 [110/1] via 192.168.1.101", what is 120 here?

A	None of them
B	Cost
C	Priority
D	Bandwidth
E	Administrative Distance

Question 2

Which ones are the requirement to juse a WLC on your site?

A	If you have more than 100 Access Points in your site
B	If your latency is more than 100 ms in your site
C	All of them
D	If you have a distribution layer on your site
E	If you have a separate datacenter in your site

Question 3

We have a network address 223.140.7.0 and we would like to divide this network into 42 subnets and there must be at least 2 host addresses in each subnet. Which subnet mush should we use?

A	255.255.255.224 (/27)
B	255.255.255.248 (/29)
C	255.255.255.240 (/28)
D	255.255.255.254 (/31)
E	255.255.255.252 (/30)

Question 4

The time source for NTP is ....

A	NTP User
B	NTP Console
C	NTP Client
D	NTP Server
E	None of them

Question 5

Drother Routers are connected to DR and BDR with .... state.

A	Exstart
B	Exchange
C	Init
D	2-way
E	Full

Question 6

OSPF Neighbourships are established with the .... of the Remote Router.

A	Device ID
B	Interface Priority
C	Interface MAC
D	Router ID
E	Interface IP

Question 7

Three-way handshake is used by UDP.

A	False
B	True

Question 8

If we would like to deny new engineers(172.16.1.0/24) to access to a specific server (1.1.1.1) with ACL 101?

A	access-list 101 172.16.1.0 0.0.0.255 1.1.1.1 permit
B	access-list 101 deny 1.1.1.1 172.16.1.0 0.0.0.255
C	acl 101 172.16.1.0 0.0.0.255 1.1.1.1 deny
D	access-list 101 deny 172.16.1.0 0.0.0.255 1.1.1.1
E	access-list 101 permit 1.1.1.1 172.16.1.0 0.0.0.255

Question 9

.... is the top traffic rate that the traffic will delivered in the normal traffic flows.

A	CIR
B	PIR
C	CER
D	EIR
E	PTR

Question 10

If the attacker links its own MAC address with a trusted IP address and manuplates the ARP table, this is .... attack.

A	Port Scanning
B	Phishing
C	Social Engineering
D	Teardrop Attack
E	ARP Spoofing

Question 11

Which ones are the AP Modes? (Select Two)

A	All of them
B	Client Mode
C	Switch Mode
D	Normal Mode
E	Rogue Detector Mode

Question 12

Which ones are the benefits of Network Automation(Select Three)

A	Higher Operation Costs
B	Lower Errors
C	Low Business Agility
D	Effective Staff
E	Better Network Control

Question 13

Which one is True about Syslog trap levels?

A	6 Warning
B	7 Notification
C	0 Emergency
D	1 Critical
E	2 Error

Question 14

RPVST+ has four states like MST (Multiple Spanning Tree).

A	True
B	False

Question 15

What is the top plane of SDN?

A	Data Plane
B	Forwarding Plane
C	Application Plane
D	Management Plane
E	None of them

Question 16

What is the network number of a host with an IP address of 185.27.145.75/28?

A	185.27.145.64/28
B	185.27.0.0/28
C	185.27.145.60/28
D	185.27.145.0/28
E	185.27.145.32/28

Question 17

If the attacker both listens and modify the traffic in a Man-in-the-Middle Attack, this is ....

A	Normal MiTM
B	Active MiTM
C	Passive MiTM
D	Distributed MiTM
E	Modified MiTM

Question 18

In AAA, .... means that “Here are your credentials, you can do these and these”.

A	Accounting
B	Authentication
C	Administration
D	Adjusting
E	Authorization

Question 19

A Private Address can be routed on the Internet.

A	False
B	True

Question 19 Explanation:

A Public Address can be routed on the Internet.

Question 20

Which ones are true for VLANs?

A	Native VLAN is VLAN 1
B	Native VLAN is VLAN 0
C	VLAN Port types: access and trunk
D	VTP is a VLAN related protocol
E	VLAN is a Layer 2 protocol

Question 21

.... VPN provides network access chance to remote users, travelling employees, any workers far away from its company.

A	Site to Site
B	Intranet
C	Remote Access
D	Internet
E	Extranet

Question 22

How can we show the VLAN trunks on a Cisco switch?

A	show trunkings
B	show trunk interfaces
C	show interface trunk
D	show trunks
E	show switchport trunks

Question 23

The other name of PAT is ....

A	Static NAT
B	Classic NAT
C	NAT Overload
D	Auto NAT
E	Dynamic NAT

Question 24

Each VLAN has its own STP process with ....

A	PVST
B	MST
C	STP
D	RSTP
E	All of them

Question 25

.... HTTP status code means that the server cannot find the requested resource.

A	200 (OK)
B	401 (Unauthorized)
C	500 (Internal Server Error)
D	404 (Unauthorized)
E	301 (Moved Permanently)

Question 26

With .... command you can see the ntp server association of the device.

A	show ntp time
B	show ntp strings
C	show ntp connections
D	show ntp tables
E	show ntp associations

Question 27

What are the two WPA modes?

A	WPA-EAP
B	WPA-ENT
C	WPA-1b
D	WPA-1a
E	WPA-PSK

Question 28

How can we configure an IP Pool named XYZ with IP subnet 172.16.1.0/24?

A	ip pool XYZ
B	network 172.16.1.0 255.255.255.0
C	ip dhcp pool XYZ
D	pool 172.16.1.0 255.255.255.0
E	ip 172.16.1.0 255.255.255.0

Question 29

What is the default violation mode of Port Security?

A	prohibit
B	prevent
C	shutdown
D	none of them
E	restrict

Question 30

Which ones are the advantages of Static Routing?

A	Low CPU and Memory Overhead
B	Automatically done by routng protocols
C	Granular Controlof the network
D	Practical for Large networks
E	Low Bandwidth Usage

Question 31

After classification, the traffic type determination must be showed also in the packet. To determine that the packet is belong to a specific type of traffic is called ...

A	Monitoring
B	Classification
C	Policing
D	Marking
E	Shaping

Question 32

How to enable lldp on Cisco routers?

A	enable lldp
B	run lldp
C	lldp start
D	undo lldp
E	lldp run

Question 33

We have an OSPF Router 1 (Router ID=1.1.1.1) and we would like to create a virtual-link from OSPF Router 1 to OSPF Router 3 (Router ID=3.3.3.3). How can we do this configuration? (OSPF Process 1 and the transit area is area 1)

A	area 1 virtual-link 3.3.3.3
B	router-id 1.1.1.1
C	area 0 virtual-link 3.3.3.3
D	virtual-link 3.3.3.3 area 0
E	router ospf 1
F	rid 1.1.1.1

Once you are finished, click the button below. Any items you have not completed will be marked incorrect. Get Results

There are 33 questions to complete.

CCNA Quiz 9

CCNA QUIZ 9

Latest Lessons

Latest Blog Posts

WHAT YOU WILL FIND?

COURSES

SPECIALS

MEMBERSHIP