CCNP SWITCH Quiz 7 ⋆ IpCisco

CCNP SWITCH QUIZ 7

Please wait while the activity loads.
If this activity does not load, try refreshing your browser. Also, this page requires javascript. Please visit using a browser with javascript enabled.

If loading fails, click here to try again

CONGRATULATIONS!

YOU HAVE COMPLETED CCNP SWITCH QUIZ 7.

YOU HAVE %%SCORE%% TRUE ANSWERS OUT OF %%TOTAL%% QUESTIONS.

YOUR SCORE IS %%PERCENTAGE%%.

%%RATING%%

Your answers are highlighted below.

Question 1

How to create VTP domain ABC?

A	domain ABC
B	vtp domain ABC
C	vtp ABC create
D	domain ABC create
E	vtp domain ABC create

Question 2

MAC tables are the list of ..... addresses and the associated ....

A	Ports / System ID
B	IP / Ports
C	Ports / MAC
D	Ports / IP
E	MAC / Ports

Question 3

How to configure interface range fa0/1-4 with pacp in desirable mode?

A	channel-group 1 mode desirable
B	channel-protocol pagp
C	interface range fa0/1-4
D	ether-group 1 mode desirable
E	channel-protocol protocolpagp

Question 4

In Root bridge election the .... priority wins and elected as Root bridge.

A	Lowest
B	Highest

Question 5

How can we configure port security violation mode as shutdown under an interface?

A	switchport violation shutdown
B	port-security violation shutdown
C	switchport violation shutdown
D	switchport port-security shutdown
E	switchport port-security violation shutdown

Question 6

What is true for TACACS+?

A	Separate Authentication and Authorization
B	Generally used for Accounting
C	UDP Based
D	Generally used for Administration
E	Full packet encryption

Question 7

We use .... SPAN, if the source and destination are on different switches

A	Remote
B	Close
C	Neighbor
D	None of them
E	Far

Question 8

.... is used on Multiple uplinks to provide not a blocking state but a standby state which can act as active even if forwarding interface becomes unavailable.

A	UDLD
B	UplinkFast
C	BPDU Filter
D	Portfast
E	Backbonefast

Question 9

.... priority provide a router to be selected as HSRP Active router.

A	Highest
B	Lowest

Question 10

With ...., groups of VLANs can set their own STP domain.

A	PVST+
B	RSTP
C	STP
D	MST
E	PVST

Question 11

Which ones are the advantages of using VLANs?

A	Flexible User management
B	Scalable Solution
C	Better security
D	Separation between different departments
E	All of them

Question 12

Which ones are true for switches but not for hubs?

A	Intelligent
B	All of them
C	Have multiple ports
D	Provide Loop Avoidance
E	Learns MAC Addresses

Question 13

Which protocol is Standard Based Neighbor Discovery?

A	NDP
B	LLDP
C	LDP
D	CDP
E	DTP

Question 14

What are the layers of Cisco hierarchical Network Model?

A	Access
B	Core
C	Data Link
D	Distribution
E	Presentation

Question 15

Which ones are Layer 2 Protocols?

A	STP
B	RSTP
C	IP
D	ARP
E	OSPF

Question 16

How can we start lldp globally on a Cisco switch?

A	lldp run
B	lldp on
C	lldp
D	lldp start
E	lldp enable

Question 17

Which ones are RSTP port types?

A	All of them
B	Designated port
C	Alternate port
D	Root port
E	Backup port

Question 18

How can we assign VLAN 151 and 152 to Primary VLAN 150 on a Cisco switch?

A	vlan 150
B	private-vlan vlan 151-152
C	vlan 150 create
D	private-vlan 151-152
E	private-vlan association 151-152

Question 19

To disable automatic timeout of switch connection, we use ... command in the line configuration mode.

A	no exec-timeout
B	disable logout
C	no logout
D	timeout 0 0
E	exec-timeout 0 0

Question 20

STP .... State is the state that MAC Table is filled with the learned addresses.

A	Full
B	Blocked
C	Listenning
D	Established
E	Learning

Once you are finished, click the button below. Any items you have not completed will be marked incorrect. Get Results

There are 20 questions to complete.

CCNP SWITCH Quiz 7

CCNP SWITCH QUIZ 7

Latest Lessons

Latest Blog Posts

WHAT YOU WILL FIND?

COURSES

SPECIALS

MEMBERSHIP