CCIE R&S Quiz 4 ⋆ IpCisco

CCIE ENTERPRISE INFRASTRUCTURE QUIZ 4

Please wait while the activity loads.
If this activity does not load, try refreshing your browser. Also, this page requires javascript. Please visit using a browser with javascript enabled.

If loading fails, click here to try again

CONGRATULATIONS! YOU HAVE COMPLETED CCIE ENTERPRISE INFRASTRUCTURE QUIZ 4. YOU HAVE %%SCORE%% TRUE ANSWERS OUT OF %%TOTAL%% QUESTIONS. YOUR SCORE IS %%PERCENTAGE%%. %%RATING%%

Your answers are highlighted below.

Question 1

Which ones are True about SNMP messages?

A	snmpv2 trap : It is used to inform about unusual situations.
B	get-bulk-request : It is used to request big data from Agent MIB.
C	inform-response : It is used to set a value in Agent’s MIB.
D	get-next-request : It is used to request next MIB value from Agent MIB.
E	set-request : It is the response from the Agent.

Question 2

Which ones are the VTP modes used by VTP?

A	Server
B	Transparent
C	All of them
D	Off
E	Client

Question 3

Which one is set to provide a point-to-multipoint IPv6 link over the existing IPv4 network?

A	6rd
B	Dual Stack
C	6in4
D	None of them
E	ISATAP

Question 4

How can we display Frame-Relay DLCIs and the associated IP Neighbors?

A	show fr dlci
B	show frame-relay details
C	show frame-relay dlci
D	show frame-relay brief
E	show frame-relay map

Question 5

Which ones are the modes of PIM?

A	Dense mode
B	Fast mode
C	Sparse mode
D	Cache mode
E	Bidirectional mode

Question 6

VRRP uses Virtual MAC address. The value of this MAC address is ....

A	0000.5e00.01xx
B	0000.fe00.0100
C	0000.5e00.0100
D	0000.5500.01xx
E	0000.5e00.00xx

Question 7

BFD is used with which protocols?

A	BGP
B	OSPF
C	All of them
D	Static routes
E	LDP

Question 8

To clear allBGP neighbor connections, we use ....... command on Cisco routers.

A	clear ip
B	clear ip protocols
C	clear bgp routes
D	clear ip bgp
E	clear protocols

Question 9

When a BGP router receives two routing updates for the same prefix , how many routing updates will it send to a second neighbor?

A	Infinite
B	None
C	Two
D	One
E	All

Question 10

Which ones are IPv6 Unicast addresses?

A	Broadcast-Global
B	Anycast-Local
C	Unique-Local
D	Global Unicast
E	Link-Local

Question 11

In IP Multicast we use Route Suppression for ....

A	To increate report messages of the same group
B	To reduce report messages of the same group
C	To register to Source
D	To register to RP
E	To reduce query messages of the same group

Question 12

To synchronize LSDBs between routers in the same area in the IS-IS domain, ..... are used.

A	PDUs
B	SNPs
C	LSPs
D	IIHs
E	LSAs

Question 13

RIPv2 uses .... and RIPng uses .....

A	Port 51 / Port 52
B	Port 152 / Port 151
C	Port 520 / Port 521
D	Port 521 / Port 520
E	Port 52 / Port 51

Question 14

How can we check the CPU processes of a router?

A	show cpu
B	show cpu process
C	show process cpu
D	show cpu router
E	show router cpu

Question 15

How to send all traffic that do not match with any route in routing table to a 172.16.200.0/24 network ?

A	static route 172.16.200.0 255.255.255.0
B	ip route 172.16.200.0 255.255.255.0 null0
C	set route 172.16.200.0 255.255.255.0
D	static route 172.16.200.0 255.255.255.0 null0
E	ip route 172.16.200.0 255.255.255.0

Question 16

With which command can we configure EIGRP Router ID as 10.10.10.10?

A	eigrp rid 10.10.10.10 0.0.0.0
B	eigrp rid 10.10.10.10
C	eigrp router-id 10.10.10.10
D	router-id 10.10.10.10
E	eigrp 10.10.10.10 0.0.0.0

Question 17

What is the Layer 2 Frame Header Type field for an ARP Frame?

A	0x4020
B	0x8060
C	0x2000
D	0x2060
E	0x8065

Question 18

How can we configure Load Balancing type as Round-Robin for GLBP 10?

A	glbp 10 load-balancing round-robin
B	glbp 10 round-robin
C	glbp 10 round-robin load-balancing
D	glbp 10 round-robin lb
E	glbp 10 load-balancing type round-robin

Question 19

In an STP domain, in every network segment, there is a one .... Port. This is the closest port to the Root Bridge.

A	Backup
B	Designated
C	Alternate
D	Blocked
E	Root

Question 20

How can we display, VRF xyz Routing table?

A	show route vrf xyz
B	show ip route vrf xyz
C	show vrf xyz
D	show ip route xyz
E	show ip vrf xyz

Question 21

Which ones are the correct order of HSRP states?

A	Init, Speak, Learn, Listen, Standby/Active
B	Standby/Active, Listen, Speak, Init, Learn
C	Standby/Active, Init, Learn, Listen, Speak
D	Init, Learn, Listen, Speak, Standby/Active
E	Init, Speak, Standby/Active, Learn, Listen

Question 22

If you have an IPv6 address 2001:0:154:4477:0:0:1154:81, what is your Solicited-node address?

A	FF02::1:FF54:81
B	FF02::1:FFFF:0:81
C	FF02::1:0054:81
D	FF02::1:FF00:81
E	FF02::1:FFFF:81

Question 23

Which command is used on a Cisco switch to instruct the interface about trusting incoming DSCP markings?

A	mls trust dscp
B	qos dscp enable
C	qos dscp select
D	mls qos trust dscp
E	qos trust dscp

Question 24

.... are sent when there is a fatal error condition.

A	Error messages
B	Notification messages
C	Keepalive messages
D	Update messages
E	Hello messages

Question 25

To build a port channel form a couple of ports, which properties must be identical?

A	Same Allowed VLANs
B	All of them
C	Speed Settings
D	Operating modes
E	Duplex Settings

Question 26

What is the Native VLAN and the Normal VLAN Range?

A	1 / 2–99
B	1 / 2–100
C	1 / 2–1001
D	0 / 1–1001
E	0 / 2–100

Question 27

Which ones are True for IPv6?

A	Supports Mobility
B	All of them
C	Provides Larger Address Space
D	Uses IPSec
E	Anycast addresses are used

Question 28

With which command can we redistribute static routes to EIGRP?

A	redistribute static
B	static redistribute
C	redistribute protocols
D	redistribute connected
E	connected redistribute

Question 29

How to configure an IP SLA schedule for a SLA Group consist of IP SLA 4,5,6 forever with immediate start? (Group Operation Number = 1, IP SLAs=4,5,6)

A	ip sla-group 1 4,5,6 life forever start-time now
B	ip sla-group schedule 4,5,6 life forever start-time now
C	ip sla group schedule 1 4,5,6 forever start-time now
D	ip sla group schedule 1 4,5,6 life forever start-time now
E	ip-sla group schedule 1 4,5,6 forever start now

Question 30

In IS-IS Hello PDU there is a part called Circuit Type. Which ones are the Circuit Types that can be configured on this part?

A	101: Level-1-2-3-4
B	100: Level-1-2-3
C	10: Level-2
D	01: Level-1
E	11: Level-1-2

Question 31

How can we display the brief information about HSRP configuration?

A	show hsrp summary
B	show hsrp brief
C	show hsrp
D	show standby summary
E	show standby brief

Question 32

To set a switch as a root in a MST instance manually, we need to use .... command.

A	spanning-tree mst "instance-id" root primary
B	mst primary "instance-id" root
C	spanning-tree mst "instance-id" primary
D	spanning-tree mst primary root "instance-id"
E	mst primary root "instance-id"

Question 33

How to set MPLS MTU as 1520 on Cisco Routers?

A	mtu 1520
B	mpls 1520
C	mpls mtu 1520
D	set mpls mtu 1520
E	set mtu 1520

Question 34

How can we configure EIGRP with AS Number 100 for network 172.16.0.0/16 and 192.168.0.1/24?

A	network 192.168.1.0 255.255.255.0
B	network 192.168.1.0 0.255.255.255
C	network 172.16.0.0 0.0.255.255
D	router eigrp 100
E	network 172.16.0.0 255.255.0.0

Question 35

How can we check OSPFv3 interfaces on a Cisco Router?

A	show ipv6 interface
B	show ospf interface
C	show ipv6 ospf interface
D	show interfaces
E	show interfaces ospf

Question 36

How can we configure an Extended ACL with ACL Number 100 that permit only ICMP traffic coming form 10.10.10.0/24 to server 1.1.1.1?

A	Router(config)# ip access-list extended 100 Router(config-ext-nacl)# permit icmp 10.10.10.0 255.255.255.0 host 1.1.1.1
B	Router(config)# extended-access-list 100 Router(config-ext-nacl)# deny icmp 10.10.10.0 255.255.255.0 host 1.1.1.1
C	Router(config)# extended-access-list 100 Router(config-ext-nacl)# permit icmp 10.10.10.0 0.0.0.255 host 1.1.1.1
D	Router(config)# ip access-list extended 100 Router(config-ext-nacl)# denyicmp 10.10.10.0 0.0.0.255 host 1.1.1.1
E	Router(config)# ip access-list extended 100 Router(config-ext-nacl)# permit icmp 10.10.10.0 0.0.0.255 host 1.1.1.1

Question 37

.... provide an immediate replace of a down Root Port to an alternate one. This provide a quick convergence of switch CAMs.

A	UplinkFast
B	PortFast
C	Root Guard
D	BPDU Filter
E	BackboneFast

Question 38

Which STP costs are given Correct?

A	Ten Gig Ethernet = 2
B	All of them
C	Fast Ethernet = 19
D	Ethernet = 100
E	Gigabit Ethernet = 4

Question 39

How to create an SNMP community named ABC as Read Only under global configuration mode?

A	snmp-server ABC read-only
B	snmp-community ABC ro
C	snmp-server community ABC ro
D	snmp community ABC read-only
E	snmp-server community ABC rw

Question 40

How to check the statistics of NetFlow?

A	show ip statistics
B	show ip netflow
C	show ip cache statistics
D	show ip netflow statistics
E	show ip cache flow

Question 41

By default, MPLS TTL propagation is enabled.

A	True
B	False

Question 42

Which ones are the types of LLDP TLVs?

A	Transitive TLVs
B	Mandatory TLVs
C	Standard TLVs
D	Nontransitive TLVs
E	Optional TLVs

Question 43

What is the default Local Preference value?

A	100
B	200
C	120
D	170
E	110

Question 44

If we get a ping response "M.M.M.M.M", what is this means?

A	Packets are too small
B	Destination is reachable
C	Destination is unreachable
D	Fragmentation is needed
E	Destination is busy

Question 45

In OSPF Neighborship Establishment, DR and BDR selection is done in .... State.

A	Full
B	Exchange
C	Exstart
D	2-Way
E	Init

Question 46

With which parameter does a BSR is elected and what is used secondly?

A	Highest IP Address / Highest BSR Priority
B	Highest BSR Priority / Highest IP Address
C	Lowest MAC Address / Highest BSR Priority
D	Lowest MAC Address / Lowest BSR Priority
E	Lowest BSR Priority / Lowest MAC Address

Question 47

Which ones are Qos Mechnisms used in a Network?

A	Integrated Services
B	Differentiated Services
C	All of them
D	Extended Services
E	Best Effort

Question 48

..... state indicates that the session is up.

A	Full
B	Up
C	Openconfirmed
D	Hello Sent
E	Established

Question 49

In ...., packets traverse from a source to a destination in a path and come back from another path from destination to the source again.

A	Asymmetric routing
B	Double routing
C	Symmetric routing
D	Multi-routing
E	Duplicate Routing

Question 50

Which ones are allowed into an OSPF NSSA?

A	ALl of them
B	LSA 7
C	LSA 3
D	LSA 5
E	LSA 4

Once you are finished, click the button below. Any items you have not completed will be marked incorrect. Get Results

There are 50 questions to complete.

gokhankosem

Gokhan Kosem is a Network Engineer, Instructor and the Founder of IPCisco.com with 15+ years of experience in Cisco, Nokia, Huawei, Juniper, Linux, Service Provider Networks, Routing and Switching technologies.

He has worked on the backbone networks of major service providers and network vendors including Nortel, Alcatel-Lucent (Nokia) and has extensive hands-on experience with Cisco, Huawei, Juniper and Nokia networking technologies.

He has trained thousands of networking students worldwide through IPCisco.com, Udemy, books, labs, quizzes, and educational content across multiple social media platforms.

IPCisco.com | Best Route to Your Dreams

CCIE R&S Quiz 4

CCIE ENTERPRISE INFRASTRUCTURE QUIZ 4

Latest Lessons

Latest Blog Posts

WHAT YOU WILL FIND?

COURSES

SPECIALS

MEMBERSHIP