CCIE R&S Quiz 8

CCIE ENTERPRISE INFRASTRUCTURE QUIZ 8

  CONGRATULATIONS! YOU HAVE COMPLETED CCIE ENTERPRISE INFRASTRUCTURE QUIZ 8. YOU HAVE %%SCORE%% TRUE ANSWERS OUT OF %%TOTAL%% QUESTIONS. YOUR SCORE IS %%PERCENTAGE%%. %%RATING%%  
Your answers are highlighted below.
Question 1
Which one is true for UDLD?
A
Cisco Proprietary
B
Works on Layer 2
C
Standard Based
D
Uses Echo mechanism
E
Works on Layer 3
Question 2
Under OSPF process, how can we redistributes all the ISIS Level-1 Routes into OSPF with Metric 20 ? 
A
redistribute isis level-1 metric 20
B
redistribute isis level-1
C
redistribute isis metric 20 level-1 subnets
D
redistribute isis level-1 20
E
redistribute isis 20 level-1 subnets
Question 3
There is a mechanism in IP Multicast, to check the Multicast traffic, if it is coming from the expected port or not. What is this mechanism?
A
IGMP Check
B
Port Check
C
RPF Check
D
Poison Reverese
E
Split Horizon
Question 4
How to enable an interface for IPv6 on a Cisco Router?
A
ipv6 start
B
enable
C
ipv6 no shutdown
D
ipv6 enable
E
create
Question 5
How to displays assigned IP addresses, related MAC addresses and the lease time on Cisco routers?
A
show ip associations
B
show dhcp associations
C
show ip dhcp details
D
show ip dhcp binding
E
show ip dhcp peers
Question 6
Which ones are True about the differences between IGMP Snooping and IGMP Proxy?
A
Proxy intercepts IGMP messages and regenerate
B
Snooping act as switch
C
Snooping do not stop the IGMP messages
D
Proxy act both as host and router
E
All of them
Question 7
If each device on the network is configured with both an IPv4 and IPv6 address. This is :
A
IPv4/IPv6 Dual Stacks
B
NAT64
C
Terado
D
IPv6 Tunnelling
E
None of them
Question 8
.....  is a feature that mandates that a route must not be advertised over an interface that is used to reach it.
A
Split Horizon
B
None of them
C
Route Advertising
D
Feasible Successor
E
Advertised distance
Question 9
Which ones are True for First Hop Redundancy Protocols?
A
All fo them
B
HSRP Port is UDP 1985
C
Default HSRP Hello is 5 seconds
D
Default Priority of all FHRPs are 100
E
Master Router election is done with MAC addresses in VRRP
Question 9 Explanation: 
Default HSRP Hello is 3 seconds. In VRRP Master router election is done according to Priority values.
Question 10
To see the traffic statistics collected by NBAR we will use .... command.
A
show ip nbar protocol details
B
show nbar-protocol brief
C
show ip nbar protocol
D
show ip nbar protocol-discovery
E
show nbar discovery
Question 11
How to redistribute all OSPF routes into EIGRP under EIGRP process? (OSPF Process ID is 20. Mertics are ; Bandwidth: 1700 Delay: 500 Reliability: 80 Load: 3 MTU: 1200)
A
redistribute ospf 20 1700, 500, 80, 3, 1200
B
redistribute 20 metric 1700 500 80 3 1200
C
redistribute ospf 20 metric 1700 500 80 3 1200
D
redistribute ospf 20 metric 1700, 500, 80, 3, 1200
E
redistribute ospf 20 1700 500 80 3 1200
Question 12
We can disable BGP syncronization on Cisco routers with .... command.
A
no synchronization
B
synchronization disable
C
synchronization
D
synchronization off
E
no shutdown synchronization
Question 13
How can we enable OSPFv3 under an interface under area 0 on a Cisco router?
A
ipv6 ospf 1 area 0
B
ospf ipv6 area 0
C
ipv6 1 area 0 ospf
D
ipv6 area 0 ospf
E
ospf ipv6 area 0
Question 14
How to enable Bidirectional PIM on Cisco routers?
A
ip pim bidirectional run
B
pim bidir-enable
C
ip pim bidir-enable
D
pim bidirectional mode
E
ip pim bidirectional
Question 15
.... Multicast Addresses are used to prevent inter-domain adress conflicts.
A
Anycast
B
Solicited
C
Global
D
Link-Local
E
GLOP
Question 16
How can we display LIB in an MPLS network?
A
show mpls bindings
B
show ldp bindings
C
show mpls ldp bindings
D
show ldp lib
E
show mpls lib
Question 17
Which ones are the Sub Phases of PPPoE Session Stage?
A
Authentication Phase
B
LACP Phase
C
NCP Phase
D
LCP Phase
E
Session Phase
Question 18
If we have two route to a destination with both OSPF and RIP, which route is selected with the default ADs?
A
None of them
B
RIP
C
OSPF
D
Both of them
Question 19
Which ones are the GLBP Load Balancing options?
A
Weighted
B
Round-robin
C
Host-dependent
D
Enhanced
E
Server-dependent
Question 20
How can we check the configuration about EIGRP in all configuration?
A
show running-config | eigrp part
B
show running-config | eigrp configuration
C
show running-config | eigrp
D
show running-config | section eigrp
E
show running-config | conf eigrp
Question 21
When using Cisco Express Forwarding (CEF), which ones are in Data Plane?
A
Routing Table
B
Adjacency Table
C
Topology Table
D
FIB
E
ARP Cache
Question 22
How can we set the maximum active links as 4 in a Bundle configured with LACP?
A
lacp bundle 4
B
set max-bundle 4
C
lacp max-bundle 4
D
max-bundle 4 lacp
E
lacp-max 4
Question 23
Which one is the most commonly used version of NetFlow?
A
Version 5
B
Version 6
C
Version 9
D
Version 8
E
Version 7
Question 24
.... feature in OSPFv3 provides nonstop data forwarding while the OSPFv3 routing information is being restored.
A
Reboot
B
Graceful Restart
C
Graceful Reboot
D
Non Stop Restart
E
Restart
Question 25
What is the System ID for 49.0001.5050.5050.5050.00 NSAP?
A
49.0001
B
49
C
5050.5050.5050
D
0001
E
00
Question 26
To view all routes learned by RIP even they are not in the Routing Table, we use .... command.
A
show ip route rip
B
show ip rip database
C
show ip rip route
D
show ip route
E
show ip rip
Question 27
.... is the default queueing algorithm and requiring no configuration.
A
LLQ
B
PQ
C
FIFO
D
CQ
E
WFQ
Question 28
How to add inbound filter xyz_filter for BGP neighbor 192.168.5.2?
A
peer 192.168.5.2 prefix-list xyz_filter in
B
neighbor 192.168.5.2 xyz_filter in
C
peer 192.168.5.2 prefix-list xyz_filter
D
neighbor 192.168.5.2 prefix-list xyz_filter
E
neighbor 192.168.5.2 prefix-list xyz_filter in
Question 29
How to enable BGP always-compare-med on Cisco routers under BGP process?
A
bgp always compare
B
bgp always-compare-med
C
bgp always compare
D
bgp med-compare
E
bgp med always compare
Question 30
.... is the top traffic rate that the traffic will delivered in the normal traffic flows.
A
PIR
B
PBR
C
CBR
D
Peak
E
CIR
Question 31
.... is a Connectionless Transport Layer Protocol. .... and .... are Connection Oriented Transport Layer Protocols.  
A
UDP / TCP / SCTP
B
SCTP / UDP / TCP
C
TCP / UDP / SCTP
D
SCTP / UDP / TCP
E
TCP / SCTP / UDP
Question 32
Which ones are the ICMP Message Types?
A
Router Solicitation Message
B
Neighbor Solicitation Message
C
Neighbor Monitor Message
D
Router Advertisement Message
E
Router Peer Message
Question 33
Which ones are the message types used by VTPv1 and VTPv2?
A
Advertisement Request
B
Join
C
All of them
D
Summary advertisement
E
Subset advertisement
Question 34
What is the effective way to check bgp summary information on Cisco routers?
A
show ip bgp details
B
show bgp details
C
show ip bgp summary
D
show bgp
E
show protocols bgp
Question 35
In STP Operation, switch with the .... becomes Root Bridge.
A
Lowest Bridge ID
B
Highest System ID
C
Highest Bridge ID
D
Lowest MAC Address
E
Highest MAC Address
Question 36
Which command configures a Cisco switch as VTP Client?  
A
vtp client mode
B
vtp mode client
C
set vtp mode client
D
vtp client-mode
E
vtp client
Question 37
How can we configure an Extended ACL with ACL Number 125 that deny only FTP traffic coming from 172.16.5.0/24 to server 5.5.5.5?
A
Router(config)# ip extended-access-list 125 Router(config-ext-nacl)# deny icmp 172.16.5.0 0.0.0.255 5.5.5.5
B
Router(config)# ip access-list extended 125 Router(config-ext-nacl)# permit icmp 172.16.5.0 0.0.0.255 host 5.5.5.5
C
Router(config)# ip extended-access-list 125 Router(config-ext-nacl)# permit icmp 172.16.5.0 0.0.0.255 5.5.5.5
D
Router(config)# extended-access-list 125 Router(config-ext-nacl)# permit icmp 172.16.5.0 0.0.0.255 host 5.5.5.5
E
Router(config)# extended-access-list 125 Router(config-ext-nacl)# deny icmp 172.16.5.0 0.0.0.255 host 5.5.5.5
Question 38
For which ones we can collect statistics with IP SLA?
A
Connectivity
B
Packet loss
C
Response time
D
Delay
E
All for hem
F
Jitter
Question 39
The EIGRP route that has the lowest metric to a network is called ....
A
Advertised Distance
B
Feasible Distance
C
Successor Distance
D
Optimum Distance
E
None of them
Question 40
Before MPLS configuration ... must be enabled on a Cisco router.
A
All of them
B
PHP
C
OSPF
D
RSVP-TE
E
CEF
Question 41
In Primary VLAN Configuration, .... ports, can talk to all the other ports.  
A
Isolated
B
Promiscuous
C
Access
D
Community
E
Primary
Question 42
When you ping a destination and the result is ...., this means that the traffic is being load-balanced?
A
!.!.!.!.!.!
B
!!!!!!!!!
C
...........
D
M.M.M.M
Question 43
Which ones are the states of PVSTP+?  
A
Listenning
B
Learning
C
Forwarding
D
Blocking
E
Disabled
F
Alternate
Question 44
What is the range of labels that is assigned dynamically by MPLS protocols?
A
0 - 32.768
B
0 - 131.071
C
32.768 - 131.071
D
32.768 - 64.768
E
0 - 64.768
Question 45
How to display the available memory on line cards of a router?
A
show environment
B
show buffers
C
show hardware
D
show memory
E
show diag
Question 46
To select anything that matches the prefix or any routes contained within the prefix, we use .... keyword.
A
longer-prefixes
B
shorter-match
C
longer-match
D
prefix-match
E
shorter-prefixes
Question 47
If we want to make the router to wait 20 seconds before HSRP preemption, which command must we use?
A
stanby preempt delay
B
stanby 1 preempt delay 10
C
stanby preempt delay 10
D
stanby 1 delay 10
E
stanby 1 delay 10 preempt
Question 48
How to configure 2002:cc:11::/128 address as Anycast address on a Cisco Router under an interface?
A
anycast ip address 2002:cc:11::/128
B
ipv6 address 2002:cc:11::/128 anycast
C
anycast-ip-address 2002:cc:11::/128
D
ip address 2002:cc:11::/128
E
ip address 2002:cc:11::/128 anycast
Question 49
What is the metric advertised by a neighbor router for a specific route in EIGRP Terminology?
A
Best distance
B
Feasible distance
C
Successor
D
Feasible successor
E
Reported distance
Question 50
If the neighbor that you want to establish BGP neighborship, is not directly connected we use .... key word with neigborship command.
A
ebgp-multihop
B
next-hop-self
C
ibgp-multihop
D
update-source
E
none of them
Once you are finished, click the button below. Any items you have not completed will be marked incorrect. Get Results
There are 50 questions to complete.
gokhan-kosem-instructor-ipcisco

Gokhan Kosem is a Network Engineer, Instructor and the Founder of IPCisco.com with 15+ years of experience in Cisco, Nokia, Huawei, Juniper, Linux, Service Provider Networks, Routing and Switching technologies.

He has worked on the backbone networks of major service providers and network vendors including Nortel, Alcatel-Lucent (Nokia) and has extensive hands-on experience with Cisco, Huawei, Juniper and Nokia networking technologies.

He has trained thousands of networking students worldwide through IPCisco.com, Udemy, books, labs, quizzes, and educational content across multiple social media platforms.

IPCisco.com | Best Route to Your Dreams