CCIE R&S Quiz 3 ⋆ IpCisco

CCIE ENTERPRISE INFRASTRUCTURE QUIZ 3

Please wait while the activity loads.
If this activity does not load, try refreshing your browser. Also, this page requires javascript. Please visit using a browser with javascript enabled.

If loading fails, click here to try again

CONGRATULATIONS! YOU HAVE COMPLETED CCIE ENTERPRISE INFRASTRUCTURE QUIZ 3. YOU HAVE %%SCORE%% TRUE ANSWERS OUT OF %%TOTAL%% QUESTIONS. YOUR SCORE IS %%PERCENTAGE%%. %%RATING%%

Your answers are highlighted below.

Question 1

Which multicast address does RIPng routers use in IPv6?

A	FF02::6
B	FF02::A
C	FF02::9
D	FF02::5
E	FF02::1

Question 2

What is the Default VRRP Priority?

A	150
B	10
C	200
D	100
E	1

Question 3

Which ones are the SNMPv2 packet types?

A	set-request
B	get-request
C	get-table-request
D	get-bulk-request
E	snmpv2-check

Question 4

How can we define an ICMP Echo under IP SLA Configuration? (Destination=2.2.2.2 Source=1.1.1.1)

A	icmp 2.2.2.2 source 1.1.1.1 echo
B	destination 2.2.2.2 source-ip 1.1.1.1
C	icmp-echo 2.2.2.2 source-ip 1.1.1.1
D	echo 2.2.2.2 source-ip 1.1.1.1
E	icmp 2.2.2.2 source 1.1.1.1

Question 5

For QoS, in DSCP field there is a field used for Drop Probability. Which one shows that a High Drop probability for a packet?

A	110
B	001
C	000
D	010
E	100

Question 6

.... periodically tests bidirectional communication between ports that it is configured.

A	BPDU Guard
B	Backbonefast
C	UDLD
D	Portfast
E	Uplinkfast

Question 7

Which IGMP versions support Leave Messages?

A	None of them
B	All of them
C	IGMPv3
D	IGMPv2
E	IGMPv1

Question 8

Firstly, according to the which criteria, DIS is selected in an IS-IS network?

A	Highest interface mac
B	Highest interface priority
C	Lowest interface priority
D	Lowest interface ip
E	Highest interface ip

Question 9

How to add outbound filter ABC for BGP neighbor 192.168.0.1?

A	peer 192.168.0.1 prefix-list ABC out
B	network 192.168.0.1 list ABC out
C	neighbor 192.168.0.1 prefix-list ABC out
D	neighbor 192.168.0.1 list ABC out
E	network 192.168.0.1 prefix-list ABC out

Question 10

How to set Bidirectional PIM Randevous Point on a Cisco router? (RP=1.1.1.1)

A	ip pim bidir-rp 1.1.1.1
B	pim rp 1.1.1.1 bidir
C	ip pim rp-address 1.1.1.1
D	ip pim rp-address 1.1.1.1 bidir
E	pim bidir-rp-address 1.1.1.1

Question 11

Default OSPF priority for Cisco routers is ...

A	100
B	150
C	1
D	0
E	255

Question 12

To clear EIGRP Neighbor Tables, we use .... command.

A	clear ip eigrp { ipv4 \| ipv6 } table
B	clear eigrp { ipv4 \| ipv6 } neighbors
C	clear eigrp address-family { ipv4 \| ipv6 } table
D	clear ip eigrp neighbors
E	clear eigrp address-family { ipv4 \| ipv6 } neighbors

Question 13

If you have a AS Number 48968, what is your GLOP Address range?

A	233.48.70.0/24
B	233.2.5.0/24
C	233.14.4.0/24
D	233.124.60.0/24
E	233.191.74.0/24

Question 13 Explanation:

32768 16384 8192 4096 2048 1024 512 256 128 64 32 16 8 4 2 1 1 0 1 1 1 1 1 1 0 1 0 0 1 0 1 0 10111111 = 191 01001010 = 74

Question 14

How can you check the hops through the way to an MPLS Node 1.1.1.1?

A	traceroute mpls 1.1.1.1/32
B	traceroute ipv4 1.1.1.1/32
C	traceroute mpls ipv4 1.1.1.1/32
D	traceroute mpls 1.1.1.1 0.0.0.0
E	traceroute mpls ipv4 1.1.1.1 0.0.0.0

Question 15

When we disable TTL propagation, this makes routers set the TTL value as .....

A	255
B	254
C	1
D	100
E	0

Question 16

In IPv4, 127.0.0.1 is loopback IP address. What is the equivalent of this in IPv6?

A	::1
B	127:0::0:1
C	::127
D	127::1
E	::0

Question 17

Which ones or some of the capabilities of NBAR? (Select Four)

A	Reducing or blocking spam.
B	Enhancing network security.
C	Maximazing latency.
D	Provide data-flow bottlenecks.
E	Optimizing multiple-service performance.
F	Detecting and blocking malware.

Question 18

Which FHRP can use a physical interface IP address as Virtual IP address?

A	None of them
B	GLBP
C	All of them
D	HSRP
E	VRRP

Question 19

How can we enable BFD on all OSPFv3 interfaces under router configuration mode?

A	bfd all-interfaces
B	bfd enable
C	bfd interfaces
D	bfd all enable
E	bfd enable run

Question 20

How can we permit FTP traffic coming from any host to 172.16.184.0/26 with an ACL? (ACL Number 145)

A	access-list 145 permit tcp any 172.16.184.0 0.0.0.63 ftp
B	access-list 145 permit tcp 172.16.184.0 0.0.0.63 any ftp
C	access-list 145 permit tcp any 172.16.184.0 0.0.0.63 eq ftp
D	access-list 145 deny tcp any 172.16.184.0 0.0.0.63 eq ftp
E	access-list 145 permit tcp 172.16.184.0 0.0.0.63 any eq ftp

Question 21

.... uses full updates if it will discover a neighbor. If not, it uses partial updates.

A	RIP
B	EIGRP
C	IS-IS
D	BGP
E	OSPF

Question 22

Which ones are manual IPv6 Tunneling techniqıes?

A	6to4
B	Teredo
C	ISATAP
D	Dual Stack
E	GRE

Question 23

What is the correct order of STP states?

A	Forwarding, Learning, Listening, Blocking
B	Disabled, Blocking, Listening, Learning, Forwarding
C	Blocking, Listening, Learning, Forwarding,
D	Blocking, Learning, Listening, Forwarding
E	Disabled, Blocking, Learning, Listening, Forwarding

Question 24

While using L3VPN technology, to distinguish different customers in MPLS network, .... is used.

A	None of them
B	VRF
C	Route Target
D	Route Distinguisher
E	Route Table

Question 25

.... is a small size frame that is less than 64 bytes. It has also a bad CRC.

A	Giants
B	Runt
C	Errors
D	None of them
E	Tinny

Question 26

In BGP Table .... sign indicates that this route is a valid route.

A	<
B	%
C	>
D	$
E	*

Question 27

The VTP .... allows switches to know when VLAN database is changed.

A	Revision number
B	Mode
C	Sequence number
D	Timestamp
E	Version

Question 28

Which ones allowed into an OSPF Stub Area?

A	LSA 5
B	LSA 7
C	LSA 4
D	Default Route
E	LSA 3

Question 29

Which ones are BGP Optional Attributes?

A	MED
B	Community
C	AS-Path
D	Aggregator
E	Local Preference

Question 30

Which command removes all dynamic entries from a router’s NAT translation table?

A	delete ip nat translation *
B	clear ip nat *
C	delete nat translation *
D	clear nat translation *
E	clear ip nat translation *

Question 31

All Routers .... are identical in an OSPF Area.

A	Routing Table
B	None of them
C	Neighbor Table
D	All of them
E	Topology Table

Question 32

If we have four route to a destination with RIP, OSPF, Internal EIGRP and Internal BGP, which one is selected as Best Route and stored in Routing Table?

A	All of them
B	OSPF
C	RIP
D	Internal EIGRP
E	Internal BGP

Question 33

How to enable DHCP serviceon a Cisco router?

A	dhcp service start
B	dhcp enable
C	service dhcp
D	dhcp-server enable
E	dhcp-server run

Question 34

Under IS-IS, how can we redistribute OSPF Internal Routes form OSPF 1 with metric 200?

A	redistribute ospf 1 metric 200 internal
B	redistribute ospf 1 200 internal
C	redistribute ospf 1 metric 200 match internal
D	redistribute ospf 1 metric 200
E	redistribute ospf 1 200 internal match

Question 35

To initiate the BGP session, .... are sent.

A	Hello messages
B	Update messages
C	Notification messages
D	Keepalive messages
E	Open messages

Question 36

To determine the minimum active links before a LACP Bundle become down, we use .... command.

A	lacp minimum
B	min-bundle lacp
C	lacp min-value
D	set lacp minimum
E	lacp min-bundle

Question 37

Which ones are true for BGP?

A	Periodic Updates
B	Incremental Updates
C	Use Autonomous Systems
D	Path Vector
E	Use Areas

Question 38

How can we check the AH Keys on Cisco routers?

A	show crypto ipsec policy
B	show crypto policy
C	show ipsec crypto ah
D	show ah ipsec policy
E	show ipsec policy

Question 39

Which regular expression that means "Ends with"?

A	$
B	*
C	^
D	_
E	\|

Question 40

Which one is True for ISL bot not Dot1Q?

A	Standard Protocol
B	Cisco proprietary
C	Inserts tag to the frame
D	Encapsulate the frame
E	Do not use Native VLAN

Question 41

How to debug IP Multicast packets on a Cisco router?

A	debug multicasting
B	debug ip multicast
C	debug ip mpacket
D	debug mpacket
E	debug multicast

Question 42

Which ones are the messages used by GLBP?

A	Connect
B	Hello
C	Discover
D	Request
E	Reply

Question 43

How can we see the details of STP Root Bridge for VLAN 5?

A	show spanning-tree root statistics vlan 5
B	show spanning-tree root vlan 5
C	show spanning-tree vlan 5 details
D	show spanning-tree vlan 5 root detail
E	show spanning-tree vlan 5 root statistics

Question 44

How can we set OSPF Hello time as 30 on Cisco routers?

A	ip hello-interval 30
B	ip ospf interval 30
C	ospf ip hello 30
D	ip ospf hello-interval 30
E	ospf ip interval 30

Question 45

HSRP Hello packets are sent to the multicast address ... over UDP port ...

A	224.0.0.2 / 1945
B	224.0.0.1 / 1985
C	224.0.0.2 / 1965
D	224.0.0.2 / 1985
E	224.0.0.1 / 1945

Question 46

How can we check the input and output packets for interface Gigabit Ethernet 0/1?

A	show gig 0/1 counters
B	show interfaces gig 0/1 status
C	show interfaces gig 0/1 brief
D	show interfaces gig 0/1 associations
E	show interfaces gig 0/1 counters

Question 47

How can we enable RIP under an interface? (RIP Process Number is 10)

A	ipv6 rip 10 enable
B	ipv6 rip 10 on
C	ipv6 rip 10 noshutdown
D	ipv6 rip 10 run
E	ipv6 rip 10 start

Question 48

Which one is true for EIGRP?

A	Internal AD is 170
B	IPv4 Multicast address is 224.0.0.10
C	Uses DUAL Algorithm
D	Internal AD is 90
E	Uses SPF Algorithm

Question 49

Randevous Point (RP) must be located close to ....

A	Multicast Source
B	DR
C	Multicast Receiver
D	RP
E	Querier

Question 50

.... is the ARP that is used to inform the network about IP to MAC Mappings after a change.

A	Proxy ARP
B	Extended ARP
C	Gratuitous ARP
D	Standard ARP
E	None of them

Once you are finished, click the button below. Any items you have not completed will be marked incorrect. Get Results

There are 50 questions to complete.

gokhankosem

Gokhan Kosem is a Network Engineer, Instructor and the Founder of IPCisco.com with 15+ years of experience in Cisco, Nokia, Huawei, Juniper, Linux, Service Provider Networks, Routing and Switching technologies.

He has worked on the backbone networks of major service providers and network vendors including Nortel, Alcatel-Lucent (Nokia) and has extensive hands-on experience with Cisco, Huawei, Juniper and Nokia networking technologies.

He has trained thousands of networking students worldwide through IPCisco.com, Udemy, books, labs, quizzes, and educational content across multiple social media platforms.

IPCisco.com | Best Route to Your Dreams

A	clear ip eigrp { ipv4 \| ipv6 } table
B	clear eigrp { ipv4 \| ipv6 } neighbors
C	clear eigrp address-family { ipv4 \| ipv6 } table
D	clear ip eigrp neighbors
E	clear eigrp address-family { ipv4 \| ipv6 } neighbors

CCIE R&S Quiz 3

CCIE ENTERPRISE INFRASTRUCTURE QUIZ 3

Latest Lessons

Latest Blog Posts

WHAT YOU WILL FIND?

COURSES

SPECIALS

MEMBERSHIP