CCIE R&S Quiz 7 ⋆ IpCisco

CCIE ENTERPRISE INFRASTRUCTURE QUIZ 7

Please wait while the activity loads.
If this activity does not load, try refreshing your browser. Also, this page requires javascript. Please visit using a browser with javascript enabled.

If loading fails, click here to try again

CONGRATULATIONS! YOU HAVE COMPLETED CCIE ENTERPRISE INFRASTRUCTURE QUIZ 7. YOU HAVE %%SCORE%% TRUE ANSWERS OUT OF %%TOTAL%% QUESTIONS. YOUR SCORE IS %%PERCENTAGE%%. %%RATING%%

Your answers are highlighted below.

Question 1

If you want to set one set as Trunk without sending and receiving any DTP messages, which two commands you need to use?

A	switchport mode trunk
B	switchport mode on
C	switchport mode dynamic auto
D	switchport mode dynamic desirable
E	switchport nonegotiate

Question 2

Which values of first 3 bits of DSCP shows AF Classes?

A	011
B	010
C	100
D	All of them
E	001

Question 3

Which regular expression means "Begins with"?

A	$
B	\|
C	^
D	_
E	*

Question 4

Which ones can be used for Route Filtering in an EIGRP Network?

A	Prefix lists
B	Access lists
C	All of them
D	Route maps

Question 5

Which ones can be seen in the output of "show ip eigrp neighbor" command?

A	Uptime
B	Interface
C	All of them
D	Sequence
E	SRTT

Question 6

How can we give an Frame Relay interface a DLCI value 150?

A	interface-dlci 150
B	frame-relay dlci interface 150
C	frame-relay dlci 150
D	interface dlci 150 frame-relay
E	fr interface dlci 150

Question 7

In switching, firstly according to what the Superior BPDU is detected?

A	Path Cost
B	MAC Address
C	Port ID
D	IP Address
E	Root Bridge ID

Question 8

To get real time BGP upates coming to a router or going from a router, we use .... command.

A	debug bgp updates
B	debug ip bgp associations
C	debug ip bgp details
D	debug ip bgp now
E	debug ip bgp updates

Question 9

How to configure BGP neighbourship with 192.168.0.1 peer in AS 300?

A	neighbbor 192.168.0.1 asn 300
B	neighbbor 192.168.0.1 as 300
C	peer 192.168.0.1 as 300
D	peer 192.168.0.1 remote-as 300
E	neighbbor 192.168.0.1 remote-as 300

Question 10

How can we display LFIB on a Cisco Router?

A	show forwarding-table
B	show forwarding fib mpls
C	show mpls forwarding-table
D	show mpls fib tables
E	show forwarding-table mpls

Question 11

Which ones are the ACL types ?

A	Standard Access List
B	Extended Access List
C	Enhanced Access List
D	Named Access List
E	All of them

Question 12

If BGP has both established the TCP connection and sent OPEN Message, beside, it is waiting a reply OPEN Message, what is this state?

A	Connect
B	OpenSent
C	OpenConfirmed
D	Established
E	Idle

Question 13

.... is the ARP that is used between one more networks.

A	Gratuitous ARP
B	Proxy ARP
C	ARP
D	Enhanced ARP
E	None of them

Question 14

The router that has the .... priority becomes OSPF DR.

A	Selected
B	Highest
C	Lowest
D	Optimum
E	None of them

Question 15

Which ones are the packet types in VRRP Header?

A	Priority
B	Authentication Type
C	Version
D	All of them
E	Virtual Router ID

Question 16

In Routing Table if an EIGRP route is ....., this means that the Successor and Feasible Successors failed.

A	None of them
B	Active
C	Up
D	Passive
E	Down

Question 17

To tell the router to transmit events at a level and lower ones, we choose a logging level. How can we select errors and lower ones?

A	logging errors
B	logging criticals enable
C	logging errors enable
D	logging trap criticals
E	logging trap errors

Question 18

Multicast Routing Protocol Signalling direction is ...., and Multicast Flow direction is ....,

A	From Source to RP / From RP to Source
B	From Receiver to RP/ From RP to Receiver
C	From Source to Receiver / From Receiver to Source
D	From Receiver to Source / From Source to Receiver
E	From Source to DR / From DR to Source

Question 19

To get information about the hardware of a Cisco router, we use ... command.

A	show device
B	show router
C	show chassis
D	show hardware
E	show inventory

Question 20

How can we write an IPv6 mapped address for 188.200.130.5

A	::FFFF:188.200.130.5
B	::FEC0:188.200.130.5
C	FEC0::188.200.130.5
D	FFFF::188.200.130.5
E	FFFE::188.200.130.5

Question 21

What is the STP port type for all ports on a root bridge?

A	Blocked port
B	Root port
C	Designated port
D	Nondesignated port
E	Alternate port

Question 22

Which ones are SNMPv2 Messages?

A	check-response
B	get-next-request
C	get-restart
D	set-request
E	get-bulk-request

Question 23

How can we enable OSPFv3 globally on a Cisco router?

A	router ospf 1 ipv6
B	router ospf 1
C	ipv6 ospf 1
D	ipv6 router ospf 1
E	router ipv6 ospf 1

Question 24

6RD Delegated Prefix is consist of Two fields. These are : .... and ....

A	IPv4 Address
B	Service Provider Prefix
C	IPv6 Address
D	MAC Address
E	Service Provider Priority

Question 25

How to configure a Cisco router to export NetFlow cache entry to UDP Port 2055 on device 10.10.10.10? (NetFlow Version 5 and peer AS information will be used)

A	ip export 10.10.10.10 port 2055 v5
B	ip flow-export 10.10.10.10 2055 v5
C	ip flow-export 10.10.10.10 2055 version 5 peer-as
D	export ip flow 10.10.10.10 2055 version 5 peer-as
E	ip flow-export 10.10.10.10 port 2055 v5

Question 26

How to write a static route a static route to 2003:AACC:1::/64 through 2003:BBBB:1::1 on a Cisco Router?

A	ipv6 static-route 2003:AACC:1:: 2003:BBBB:1::1
B	ipv6 route 2003:AACC:1:: 2003:BBBB:1::1
C	ipv6 static-route 2003:BBBB:1::1 2003:AACC:1::/64
D	ip route 2003:AACC:1::/64 2003:BBBB:1::1
E	ipv6 route 2003:AACC:1::/64 2003:BBBB:1::1

Question 27

What is the name of the Layer 2 address used in IS-IS?

A	BPDU
B	SNPA
C	MAC
D	NSEL
E	NLPID

Question 28

How to configure Load Balancing for an EtherChannel under configured Port Channel?

A	load-balance enable
B	port-channel load-balance
C	load balancing enable
D	ether-channel load-balance
E	set load balancing

Question 29

Secondly with which Path Attribute, Best Path is selected on Cisco routers?

A	Origin
B	Local Preference
C	Weight
D	MED
E	AS_Path

Question 30

In a BGP table, which letter shows EGP Routes?

A	e
B	i
C	o
D	r
E	b

Question 31

How can we define AS Path prepending with two additional AS number 62500 by using Route Map named MY_Route_Map 30?

A	Router(config)#route-map MY_Route_Map 30 Router(config-route-map)#as-path 62500
B	Router(config)#route-map MY_Route_Map 30 Router(config-route-map)#set as 62500 62500 62500
C	Router(config)#route-map MY_Route_Map Router(config-route-map)#set as prepend 62500 62500
D	Router(config)#route-map MY_Route_Map 30 Router(config-route-map)#set as-path prepend 62500 62500
E	Router(config)#route map MY_Route_Map Router(config-route-map)#as-path prepend 62500 62500

Question 32

How to start IP SLA configuration on Cisco? ( SLA Operation Number = 10)

A	ip sla 10 run
B	sla 10 create
C	ip sla 10
D	sla 10
E	ip-sla 10 create

Question 33

Which one is True for Quality of Service (QoS) Marking?

A	In Layer 3, in IP Header, Type of Service IP Precedence and DSCP fields are used for Marking.
B	In Layer 2.5, in MPLS Header, Type of Service (Experimental) field is used for Marking.
C	All of them
D	In Layer 2, in Ethernet Header, Class of Service field is used for Marking.
E	In Upper Layers, NBAR and Deep Packet Inspection are used for Marking.

Question 34

Without deconfiguring, how can we disable IS-IS under an interface?

A	isis interface shutdown
B	isis protocol disable
C	isis shutdown
D	isis protocol shutdown
E	isis disable

Question 35

In GLBP, which one is the head of the system that is elected according to GLBP priority values?

A	Virtual Router
B	AVF
C	Standby Router
D	AVG
E	Active Router

Question 36

The General Query message is sent to the Multicast address ....

A	224.0.1.2
B	224.0.0.3
C	224.0.0.2
D	224.0.0.1
E	224.0.1.1

Question 37

To prevent External Routes into our area, we need to use OSPF .... area.

A	Totally Stub
B	Backbone
C	NSSA
D	Standard
E	Stub

Question 38

With which three command can we create RIPv2 process and add 172.16.0.0/24 network under it?

A	network 172.16.0.0 0.0.0.255
B	version 2
C	router rip enable
D	router rip
E	network 172.16.0.0 255.255.255.0

Question 39

..... message is sent on the local link if a node wants to know the link-layer address of another node on the same local link.

A	Neighbor Redirect
B	Neighbor Solicitation
C	Router Advertisement

Question 40

If you write a static route with .... , if there is no more specific match in the routing table, packets are sent to here.

A	default confederation
B	default community
C	all of them
D	default network
E	null0

Question 41

How can you ping MPLS Node 3.3.3.3?

A	ping ipv4 3.3.3.3/32
B	ping mpls 3.3.3.3/32
C	ping mpls ipv4 3.3.3.3/32
D	mpls ping 3.3.3.3/32
E	mpls ping ipv4 3.3.3.3/32

Question 42

How can we check the AS Path of the BGP routes?

A	show ip as_path
B	show ip as-prepending
C	show ip bgp as
D	show ip bgp
E	show ip bgp protocol

Question 43

MPLS VPN Labels are transfered with Service Labels.

A	False
B	True

Question 44

CIR bandwidth is configured in .... on Cisco router.

A	kilobytes per second
B	gigabit per second
C	bits per second
D	bytes per second
E	kilobits per second

Question 45

Which ones are True for IGMPv3?

A	Report Suppression is supported
B	Uses different Leave messages than IGMPv2
C	All of them
D	Uses same Leave messages like IGMPv1 and IGMPv2
E	Used with SSM

Question 46

Which one is the range of Extended VLANs?

A	99–1099
B	100–1099
C	1006–4094
D	1000–4999
E	1001–4099

Question 47

What is the least effective packet switching mode for a router?

A	Fast switching
B	Cisco Express Forwarding
C	Optimum switching
D	Cache switching
E	Process switching

Question 48

With which STP mechanism we can ignore any superior BPDU and we can protect our selected Root Port?

A	Root Guard
B	Backbone Fast
C	BPDU Guard
D	UDLD
E	Loop Guard

Question 49

How to configure IPv6 OSPF IPSec Authentication with an encrypted key? (SPI = 200, Authentication = sha1)

A	ipv6 ospf ipsec spi 200 sha1 0
B	ipv6 ospf authentication ipsec spi 200 sha1 0
C	ipv6 ospf authentication ipsec spi 200 sha1 7
D	ipv6 ospf ipsec spi 200 sha1 7
E	ipv6 ospf authentication ipsec spi 200 sha1 encrypt

Question 50

Wich ones are the modes of BFD?

A	Auto Mode
B	Sync Mode
C	Echo Mode
D	Demand Mode
E	Async Mode

Once you are finished, click the button below. Any items you have not completed will be marked incorrect. Get Results

There are 50 questions to complete.

gokhankosem

Gokhan Kosem is a Network Engineer, Instructor and the Founder of IPCisco.com with 15+ years of experience in Cisco, Nokia, Huawei, Juniper, Linux, Service Provider Networks, Routing and Switching technologies.

He has worked on the backbone networks of major service providers and network vendors including Nortel, Alcatel-Lucent (Nokia) and has extensive hands-on experience with Cisco, Huawei, Juniper and Nokia networking technologies.

He has trained thousands of networking students worldwide through IPCisco.com, Udemy, books, labs, quizzes, and educational content across multiple social media platforms.

IPCisco.com | Best Route to Your Dreams

CCIE R&S Quiz 7

CCIE ENTERPRISE INFRASTRUCTURE QUIZ 7

Latest Lessons

Latest Blog Posts

WHAT YOU WILL FIND?

COURSES

SPECIALS

MEMBERSHIP