CCIE R&S Quiz 8

CCIE ENTERPRISE INFRASTRUCTURE QUIZ 8

  CONGRATULATIONS! YOU HAVE COMPLETED CCIE ENTERPRISE INFRASTRUCTURE QUIZ 8. YOU HAVE %%SCORE%% TRUE ANSWERS OUT OF %%TOTAL%% QUESTIONS. YOUR SCORE IS %%PERCENTAGE%%. %%RATING%%  
Your answers are highlighted below.
Question 1
How to enable Bidirectional PIM on Cisco routers?
A
pim bidir-enable
B
pim bidirectional mode
C
ip pim bidir-enable
D
ip pim bidirectional
E
ip pim bidirectional run
Question 2
Which ones are the states of PVSTP+?  
A
Listenning
B
Disabled
C
Learning
D
Blocking
E
Forwarding
F
Alternate
Question 3
To select anything that matches the prefix or any routes contained within the prefix, we use .... keyword.
A
longer-prefixes
B
longer-match
C
shorter-prefixes
D
shorter-match
E
prefix-match
Question 4
Which ones are the Sub Phases of PPPoE Session Stage?
A
LACP Phase
B
NCP Phase
C
Session Phase
D
LCP Phase
E
Authentication Phase
Question 5
How to display the available memory on line cards of a router?
A
show buffers
B
show memory
C
show hardware
D
show environment
E
show diag
Question 6
.... is a Connectionless Transport Layer Protocol. .... and .... are Connection Oriented Transport Layer Protocols.  
A
TCP / SCTP / UDP
B
TCP / UDP / SCTP
C
SCTP / UDP / TCP
D
UDP / TCP / SCTP
E
SCTP / UDP / TCP
Question 7
How can we set the maximum active links as 4 in a Bundle configured with LACP?
A
lacp max-bundle 4
B
lacp bundle 4
C
set max-bundle 4
D
lacp-max 4
E
max-bundle 4 lacp
Question 8
The EIGRP route that has the lowest metric to a network is called ....
A
Optimum Distance
B
Feasible Distance
C
Successor Distance
D
None of them
E
Advertised Distance
Question 9
How to enable an interface for IPv6 on a Cisco Router?
A
ipv6 no shutdown
B
enable
C
ipv6 enable
D
create
E
ipv6 start
Question 10
We can disable BGP syncronization on Cisco routers with .... command.
A
no shutdown synchronization
B
no synchronization
C
synchronization off
D
synchronization disable
E
synchronization
Question 11
What is the metric advertised by a neighbor router for a specific route in EIGRP Terminology?
A
Best distance
B
Feasible distance
C
Feasible successor
D
Successor
E
Reported distance
Question 12
Which one is true for UDLD?
A
Works on Layer 3
B
Standard Based
C
Uses Echo mechanism
D
Works on Layer 2
E
Cisco Proprietary
Question 13
.... feature in OSPFv3 provides nonstop data forwarding while the OSPFv3 routing information is being restored.
A
Reboot
B
Graceful Reboot
C
Graceful Restart
D
Non Stop Restart
E
Restart
Question 14
What is the System ID for 49.0001.5050.5050.5050.00 NSAP?
A
00
B
49
C
49.0001
D
0001
E
5050.5050.5050
Question 15
How can we enable OSPFv3 under an interface under area 0 on a Cisco router?
A
ipv6 ospf 1 area 0
B
ospf ipv6 area 0
C
ospf ipv6 area 0
D
ipv6 area 0 ospf
E
ipv6 1 area 0 ospf
Question 16
There is a mechanism in IP Multicast, to check the Multicast traffic, if it is coming from the expected port or not. What is this mechanism?
A
Port Check
B
RPF Check
C
Split Horizon
D
Poison Reverese
E
IGMP Check
Question 17
Which command configures a Cisco switch as VTP Client?  
A
vtp client
B
set vtp mode client
C
vtp mode client
D
vtp client mode
E
vtp client-mode
Question 18
Which ones are the message types used by VTPv1 and VTPv2?
A
Join
B
Subset advertisement
C
All of them
D
Advertisement Request
E
Summary advertisement
Question 19
What is the effective way to check bgp summary information on Cisco routers?
A
show bgp details
B
show ip bgp summary
C
show protocols bgp
D
show bgp
E
show ip bgp details
Question 20
Which ones are the ICMP Message Types?
A
Neighbor Solicitation Message
B
Router Peer Message
C
Neighbor Monitor Message
D
Router Advertisement Message
E
Router Solicitation Message
Question 21
Which ones are True for First Hop Redundancy Protocols?
A
Default HSRP Hello is 5 seconds
B
Default Priority of all FHRPs are 100
C
HSRP Port is UDP 1985
D
Master Router election is done with MAC addresses in VRRP
E
All fo them
Question 21 Explanation: 
Default HSRP Hello is 3 seconds. In VRRP Master router election is done according to Priority values.
Question 22
When you ping a destination and the result is ...., this means that the traffic is being load-balanced?
A
M.M.M.M
B
...........
C
!!!!!!!!!
D
!.!.!.!.!.!
Question 23
How to configure 2002:cc:11::/128 address as Anycast address on a Cisco Router under an interface?
A
anycast-ip-address 2002:cc:11::/128
B
ip address 2002:cc:11::/128
C
anycast ip address 2002:cc:11::/128
D
ip address 2002:cc:11::/128 anycast
E
ipv6 address 2002:cc:11::/128 anycast
Question 24
If the neighbor that you want to establish BGP neighborship, is not directly connected we use .... key word with neigborship command.
A
ebgp-multihop
B
none of them
C
next-hop-self
D
ibgp-multihop
E
update-source
Question 25
How to displays assigned IP addresses, related MAC addresses and the lease time on Cisco routers?
A
show ip associations
B
show ip dhcp binding
C
show ip dhcp peers
D
show ip dhcp details
E
show dhcp associations
Question 26
.....  is a feature that mandates that a route must not be advertised over an interface that is used to reach it.
A
Route Advertising
B
Split Horizon
C
Feasible Successor
D
Advertised distance
E
None of them
Question 27
If we want to make the router to wait 20 seconds before HSRP preemption, which command must we use?
A
stanby preempt delay 10
B
stanby 1 delay 10 preempt
C
stanby preempt delay
D
stanby 1 delay 10
E
stanby 1 preempt delay 10
Question 28
To see the traffic statistics collected by NBAR we will use .... command.
A
show nbar discovery
B
show ip nbar protocol
C
show ip nbar protocol details
D
show ip nbar protocol-discovery
E
show nbar-protocol brief
Question 29
How can we display LIB in an MPLS network?
A
show ldp lib
B
show mpls ldp bindings
C
show mpls lib
D
show mpls bindings
E
show ldp bindings
Question 30
When using Cisco Express Forwarding (CEF), which ones are in Data Plane?
A
Topology Table
B
ARP Cache
C
Routing Table
D
FIB
E
Adjacency Table
Question 31
To view all routes learned by RIP even they are not in the Routing Table, we use .... command.
A
show ip route
B
show ip rip database
C
show ip rip
D
show ip route rip
E
show ip rip route
Question 32
.... Multicast Addresses are used to prevent inter-domain adress conflicts.
A
Global
B
Solicited
C
Anycast
D
GLOP
E
Link-Local
Question 33
Under OSPF process, how can we redistributes all the ISIS Level-1 Routes into OSPF with Metric 20 ? 
A
redistribute isis 20 level-1 subnets
B
redistribute isis metric 20 level-1 subnets
C
redistribute isis level-1 20
D
redistribute isis level-1
E
redistribute isis level-1 metric 20
Question 34
How can we check the configuration about EIGRP in all configuration?
A
show running-config | conf eigrp
B
show running-config | eigrp part
C
show running-config | eigrp configuration
D
show running-config | eigrp
E
show running-config | section eigrp
Question 35
How to redistribute all OSPF routes into EIGRP under EIGRP process? (OSPF Process ID is 20. Mertics are ; Bandwidth: 1700 Delay: 500 Reliability: 80 Load: 3 MTU: 1200)
A
redistribute ospf 20 1700, 500, 80, 3, 1200
B
redistribute 20 metric 1700 500 80 3 1200
C
redistribute ospf 20 1700 500 80 3 1200
D
redistribute ospf 20 metric 1700 500 80 3 1200
E
redistribute ospf 20 metric 1700, 500, 80, 3, 1200
Question 36
Before MPLS configuration ... must be enabled on a Cisco router.
A
All of them
B
PHP
C
RSVP-TE
D
CEF
E
OSPF
Question 37
How to add inbound filter xyz_filter for BGP neighbor 192.168.5.2?
A
peer 192.168.5.2 prefix-list xyz_filter
B
neighbor 192.168.5.2 xyz_filter in
C
peer 192.168.5.2 prefix-list xyz_filter in
D
neighbor 192.168.5.2 prefix-list xyz_filter in
E
neighbor 192.168.5.2 prefix-list xyz_filter
Question 38
In STP Operation, switch with the .... becomes Root Bridge.
A
Highest Bridge ID
B
Highest System ID
C
Lowest Bridge ID
D
Lowest MAC Address
E
Highest MAC Address
Question 39
.... is the default queueing algorithm and requiring no configuration.
A
CQ
B
LLQ
C
WFQ
D
PQ
E
FIFO
Question 40
Which ones are True about the differences between IGMP Snooping and IGMP Proxy?
A
Snooping act as switch
B
Snooping do not stop the IGMP messages
C
Proxy act both as host and router
D
All of them
E
Proxy intercepts IGMP messages and regenerate
Question 41
How to enable BGP always-compare-med on Cisco routers under BGP process?
A
bgp med always compare
B
bgp always compare
C
bgp always compare
D
bgp med-compare
E
bgp always-compare-med
Question 42
If we have two route to a destination with both OSPF and RIP, which route is selected with the default ADs?
A
None of them
B
RIP
C
Both of them
D
OSPF
Question 43
If each device on the network is configured with both an IPv4 and IPv6 address. This is :
A
IPv4/IPv6 Dual Stacks
B
Terado
C
NAT64
D
IPv6 Tunnelling
E
None of them
Question 44
.... is the top traffic rate that the traffic will delivered in the normal traffic flows.
A
PBR
B
Peak
C
PIR
D
CBR
E
CIR
Question 45
In Primary VLAN Configuration, .... ports, can talk to all the other ports.  
A
Promiscuous
B
Primary
C
Access
D
Isolated
E
Community
Question 46
Which ones are the GLBP Load Balancing options?
A
Round-robin
B
Weighted
C
Host-dependent
D
Server-dependent
E
Enhanced
Question 47
What is the range of labels that is assigned dynamically by MPLS protocols?
A
32.768 - 131.071
B
0 - 32.768
C
0 - 131.071
D
32.768 - 64.768
E
0 - 64.768
Question 48
For which ones we can collect statistics with IP SLA?
A
Delay
B
Jitter
C
All for hem
D
Response time
E
Packet loss
F
Connectivity
Question 49
Which one is the most commonly used version of NetFlow?
A
Version 9
B
Version 7
C
Version 6
D
Version 5
E
Version 8
Question 50
How can we configure an Extended ACL with ACL Number 125 that deny only FTP traffic coming from 172.16.5.0/24 to server 5.5.5.5?
A
Router(config)# ip extended-access-list 125 Router(config-ext-nacl)# deny icmp 172.16.5.0 0.0.0.255 5.5.5.5
B
Router(config)# extended-access-list 125 Router(config-ext-nacl)# deny icmp 172.16.5.0 0.0.0.255 host 5.5.5.5
C
Router(config)# extended-access-list 125 Router(config-ext-nacl)# permit icmp 172.16.5.0 0.0.0.255 host 5.5.5.5
D
Router(config)# ip extended-access-list 125 Router(config-ext-nacl)# permit icmp 172.16.5.0 0.0.0.255 5.5.5.5
E
Router(config)# ip access-list extended 125 Router(config-ext-nacl)# permit icmp 172.16.5.0 0.0.0.255 host 5.5.5.5
Once you are finished, click the button below. Any items you have not completed will be marked incorrect. Get Results
There are 50 questions to complete.
gokhan-kosem-instructor-ipcisco

Gokhan Kosem is a Network Engineer, Instructor and the Founder of IPCisco.com with 15+ years of experience in Cisco, Nokia, Huawei, Juniper, Linux, Service Provider Networks, Routing and Switching technologies.

He has worked on the backbone networks of major service providers and network vendors including Nortel, Alcatel-Lucent (Nokia) and has extensive hands-on experience with Cisco, Huawei, Juniper and Nokia networking technologies.

He has trained thousands of networking students worldwide through IPCisco.com, Udemy, books, labs, quizzes, and educational content across multiple social media platforms.

IPCisco.com | Best Route to Your Dreams