CCIE R&S Quiz 9

CCIE ENTERPRISE INFRASTRUCTURE QUIZ 9

  CONGRATULATIONS! YOU HAVE COMPLETED CCIE ENTERPRISE INFRASTRUCTURE QUIZ 9. YOU HAVE %%SCORE%% TRUE ANSWERS OUT OF %%TOTAL%% QUESTIONS. YOUR SCORE IS %%PERCENTAGE%%. %%RATING%%  
Your answers are highlighted below.
Question 1
Which DHCP message is sent from a client to a DHCP server to inform the server that about an already used IP address.
A
DHCPRELEASE
B
DHCPREQUEST
C
DHCPDECLINE
D
DHCPNAK
E
DHCPINFORM
Question 2
How can we set OSPF priority as 140?
A
ip priority 140
B
set ospf priority 140
C
ospf priority 140
D
set priority 140 ospf
E
ip ospf priority 140
Question 3
To mitigate a DHCP attack, which techniques can be used?
A
Dynamic ARP Inspection
B
BPDU Guard
C
DHCP Snooping
D
Root Guard
E
ARP Snooping
Question 4
What is the MST instance number range? 
A
0–4095
B
0–1095
C
0–99
D
1–99
E
0–999
Question 5
BGP Keepalive messages are sent every ...., periodically by default.
A
30 seconds
B
10 seconds
C
20 seconds
D
15 seconds
E
60 seconds
Question 6
Burstable traffic (EIR) is used with color ....
A
Orange
B
Blue
C
Green
D
Red
E
Yellow
Question 7
...... allows an ISP to give access to IPv4-only services for a customer that has only IPv6 addresses.
A
Dual Stack
B
6to4
C
DS-Lite
D
Teredo
E
None of them
Question 8
.... provides data link discovery between different networks.
A
Split Horizon
B
Proxy ARP
C
Gratuitous ARP
D
RPF Check
E
ICMP
Question 9
.... is distributes information about the full range of VLANs including Private VLANs.
A
VTPv1
B
VTPv0
C
VTPv2
D
All of them
E
VTPv3
Question 10
.... IP adresses use the same Multicast MAC address because of .... overlap ratio.
A
16 / 16:1
B
32 / 16:1
C
16 / 8:1
D
8 / 8:1
E
32 / 32:1
Question 11
How to configure a static route to 2001:BB11::/64 through gigabitethernet1/2/3 with administrative distance 120?
A
ipv6 route gigabitethernet1/2/3 120 2001:BB11::/64
B
ipv6 route 2001:BB11::/64 gigabitethernet1/2/3 120
C
ipv6 route gigabitethernet1/2/3 2001:BB11::/64 120
D
ip route 2001:BB11::/64 gigabitethernet1/2/3 120
E
ip static-route 2001:BB11:: gigabitethernet1/2/3 120
Question 12
Which ones are the FHRPs that support IPv6? 
A
HSRPv1
B
All of them
C
VRRPv2
D
HSRPv2
E
VRRPv3
Question 13
If we would like to set an IS-IS interface as level 1/2, which command must we use under that interface?
A
isis type level1 | level 2
B
isis circuit-type level1 , level 2
C
isis circuit-type level1 | level 2
D
isis circuit-type level-1-2
E
isis type level-1-2
Question 14
Which ones are OSPF Summary LSAs?
A
LSA 4
B
LSA 5
C
LSA 7
D
LSA 2
E
LSA 3
Question 15
How can we create an Access List named  My_ACL that deny DNS traffic coming from 192.168.125.0/24  to any networks?
A
Router(config)# extended-access-list My_ACL Router(config-ext-nacl)# deny udp 192.168.125.0 0.0.0.255 any eq dns
B
Router(config)# acl extended My_ACL Router(config-ext-nacl)# deny udp 192.168.125.0 0.0.0.255 any dns
C
Router(config)# ip access-list extended My_ACL Router(config-ext-nacl)# permit udp 192.168.125.0 0.0.0.255 any eq dns
D
Router(config)# ip access-list extended My_ACL Router(config-ext-nacl)# deny udp 192.168.125.0 0.0.0.255 any eq dns
E
Router(config)# access-list extended My_ACL Router(config-ext-nacl)# permit udp 192.168.125.0 0.0.0.255dns
Question 16
Which ones allowed into an OSPF Totally Stubby Area?
A
Default Route
B
LSA 3
C
LSA 4
D
LSA 7
E
LSA 5
Question 17
In Routing Table if an EIGRP route is ....., this means that it is converged.
A
Up
B
Active
C
Standard
D
Passive
E
Down
Question 18
The default MED value is .....
A
0
B
100
C
50
D
150
E
200
Question 19
How can we configure SNMP packet size as 1500?
A
snmp-server size 1500
B
snmp-packet size 1500
C
snmp-server packetsize 1500
D
snmp packet-size 1500
E
snmp size 1500
Question 20
For EIGRP Neighborship, which ones are needed?
A
Same K Values
B
Same Subnet
C
All of them
D
Sucessfull Authentication
E
Same AS Number
Question 21
Which messages types are changed or modified with IGMPv3?
A
Membership Query
B
Membership Report (V2)
C
Membership Report (V1)
D
Membership Report
E
Membership Report (V3)
Question 22
Which one is true for QoS Differentiated Services but not in Integrated Services?
A
End to End
B
Class Based
C
Uses Reservation Technique
D
Connection Oriented
E
Uses DSCP Bits
Question 23
Which ones are the states of EIGRP routes?
A
Passive State
B
Normal State
C
Silent State
D
Up State
E
Active state
Question 24
To diagnose a buffer leak, what is the most effective command?
A
show cpu
B
show protocols
C
show buffer
D
show hardware
E
show interfaces
Question 25
Which one of the following displays Settings of IPSec Security Association?
A
show ipsec details
B
show crypto ipsec details
C
show crypto ipsec sa
D
show crypto details sa
E
show protocols ipsec
Question 26
To disable BPDU Filter, we use .... command on switch ports.
A
spanning-tree bpdufilter disable
B
no spanning-tree bpdufilter
C
spanning-tree bpdufilter shutdown
D
bpdufilter disable
E
no bpdufilter
Question 27
.... is the Metro Ethernet service that is a Hub and Spoke connection between nodes.
A
E-Tree
B
E-Network
C
E-LAN
D
E-Line
E
E-Access
Question 28
RIPv2 supports .... but RIPng does not.
A
All of them
B
Plain Text
C
IPSec
D
MD5
E
Passive Interface
Question 29
Routing protocols and label exchange protocols exist at ...... plane of MPLS.
A
Control
B
Data
Question 30
OSPFv3 Router ID is .... long.
A
32 bits
B
24 bits
C
20 bits
D
16 bits
E
8 bits
Question 31
How to view information that are collected by IP SLA responder?  
A
show ip-sla details
B
show sla monitor
C
show ip-sla brief
D
show ip sla responder
E
show ip sla monitor responder
Question 32
Which GLBP states are exist in AVG but not in AVF?
A
Standby
B
Initial
C
Active
D
Speak
E
Disabled
F
Listen
Question 33
What is BGP Pull Up Route?
A
Redistribution from Dynamic Routing Protocols
B
Static route to “null0”
C
Static route to “route-reflector”
D
Dynamic routing with Link State Protocols
E
Redistribution from Static
Question 34
Which PAgP and LACP modes waits an attempt from other end to build a Bundle?
A
Active / Passive
B
Desirable / Passive
C
Desirable / Active
D
Auto / Active
E
Auto / Passive
Question 35
What is the first three bits of Expedited Forwarding (EF)?
A
111
B
101
C
000
D
110
E
100
Question 36
The Protocol Number 103 in the IP Packet means, this is a ....packet.
A
ICMP
B
MLD
C
PIM
D
IGMP
E
CGMP
Question 37
Which one is True for LWAPP ?
A
Used to detect best DHCP
B
Standard based
C
Cisco proprietary
D
Uses UDP port 12222/ 12223
E
Used to detect best WLC
Question 38
How to configure an interface for Frame Relay encapsulation?
A
encapsulation frame-relay
B
encapsulation fr
C
fr encapsulation
D
encapsulation type fr
E
frame-relay encapsulation
Question 39
How to display the information of all active IPSec Sessions?
A
show crypto active connections
B
show crypto engine connections active
C
show ipsec connections active
D
show connections active
E
show ipsec crypto connections
Question 40
How can we check ABRs and ASBRs in an OSPFv3 Area? (OSPF Process ID=10)  
A
show ospfv3 border-routers
B
show ospfv3 10 bdrs
C
show ospfv3 10 border-routers
D
show ospfv3 10 abr asbr
E
show ospf 10 abrs
Question 41
How to define VRRP Virtual IP address as 1.1.1.1?
A
vrrp 1 virtual 1.1.1.1
B
vrrp 1 ip 1.1.1.1
C
virtual-ip 1 1.1.1.1
D
vrrp 1 virtual-ip 1.1.1.1
E
virtual-ip 1.1.1.1
Question 42
How can we set password abc123 as authentication for updates between BGP peer 172.1.5.7?
A
neighbor 172.1.5.7 password abc123
B
set 172.1.5.7 password abc123
C
peer 172.1.5.7 password abc123
D
password abc123 neighbor 172.1.5.7
E
set password abc123 neighbor 172.1.5.7
Question 43
VTP messages are transmitted and accepted only on ..... ports. Other ports do not send and receive messages.
A
ISL
B
VTP
C
Access
D
VLAN
E
Trunk
Question 44
In an IS-IS network, DIS is selected according to Highest Interface Priority. If there is a tie, then the router with the .... is selected as DIS.
A
Lowest SNPA
B
Highest SNPA
C
Highest System IP
D
Lowest System IP
E
Highest Engine ID
Question 45
.... is the initialization message sent by the PPPoE Client as broadcast to discover if are there ant PPPoE Server.
A
PADK
B
PADP
C
PADI
D
PADO
E
PADS
Question 46
If there are two MPLS Labels in an MPLS Label Stack, the last labels BoS bit is set to ....
A
20
B
10
C
2
D
5
E
1
Question 47
How can we configure weight 160 to specific routes with Route Maps? (Route Map Map_abc123 will be created and Prefix List name is Prefix_List_abc)
A
Router(config)# route-map Map_abc123 permit 10
B
Router(config-route-map)# weight 160
C
Router(config-route-map)# set weight 160
D
Router(config-route-map)# match prefix-list Prefix_List_abc
E
Router(config-route-map)# match ip address prefix-list Prefix_List_abc
Question 48
To enable NBAR under an interface configuration mode, we use .... command.
A
ip nbar protocol create
B
protocol nbar run
C
ip nbar enable
D
ip nbar protocol-discovery
E
ip nbar protocol
Question 49
Devices send ..... to inform the hosts about a better first-hop nodes through the destination.
A
None of them
B
Neighbor Discovery Message
C
Neighbor Redirect Message
D
Neighbor Solicitation Message
E
Router Advertisement Message
Question 50
Before LDP configuration, we do not need to configure  IGP.
A
False
B
True
Question 50 Explanation: 
Before LDP configuration, we need to configure  IGP.
Once you are finished, click the button below. Any items you have not completed will be marked incorrect. Get Results
There are 50 questions to complete.
gokhan-kosem-instructor-ipcisco

Gokhan Kosem is a Network Engineer, Instructor and the Founder of IPCisco.com with 15+ years of experience in Cisco, Nokia, Huawei, Juniper, Linux, Service Provider Networks, Routing and Switching technologies.

He has worked on the backbone networks of major service providers and network vendors including Nortel, Alcatel-Lucent (Nokia) and has extensive hands-on experience with Cisco, Huawei, Juniper and Nokia networking technologies.

He has trained thousands of networking students worldwide through IPCisco.com, Udemy, books, labs, quizzes, and educational content across multiple social media platforms.

IPCisco.com | Best Route to Your Dreams