BGP Quiz 5 ⋆ IpCisco

BGP QUIZ 5

Please wait while the activity loads.
If this activity does not load, try refreshing your browser. Also, this page requires javascript. Please visit using a browser with javascript enabled.

If loading fails, click here to try again

CONGRATULATIONS!

YOU HAVE COMPLETED BGP QUIZ 5.

YOU HAVE %%SCORE%% TRUE ANSWERS OUT OF %%TOTAL%% QUESTIONS.

YOUR SCORE IS %%PERCENTAGE%%.

%%RATING%%

Your answers are highlighted below.

Question 1

How to create BGP process within AS 150 on Cisco routers?

A	bgp 150
B	router bgp 150 set
C	router 150
D	router bgp 150 create
E	router bgp 150

Question 2

Which messages are there in a TCP Three-Way Handsahe Mechanims?

A	FIN
B	SYN
C	SYN-ACK
D	FIN-ACK
E	ACK

Question 3

According to which Path Attribute, Best Path is selected on Cisco routers?

A	AS Path
B	Origin
C	Weight
D	Local Preference
E	MED

Question 4

By default, BGP "deterministic-med" command is disabled.

A	True
B	False

Question 5

How to enable BGP deterministic-med on Cisco routers under BGP process?

A	set bgp deterministic-med
B	set deterministic med
C	bgp deterministic-med enable
D	bgp deterministic-med
E	set deterministic med bgp

Question 6

How can we configure local preference as 200 for AS 105 on Cisco routers?

A	bgp default local-preference 200
B	bgp local-preference 200
C	router bgp 105 create
D	router bgp 105
E	bgp preference 200

Question 7

BGP Keepalive Messages are to check the availability of the link.

A	True
B	False

Question 8

During route advertisement, the non directly connected routers to the external peer, the IBGP peers, need to learn how to go to the advertised route. Because without any information, they can not go to an unknown place.To give this information to the IBGP peers, we use ..... command

A	source-next-hop
B	multi-hop
C	next-hop-self
D	update-source
E	peer-check

Question 9

How can we adjuct BGP Keepalive and Hold time timers for neighbor 142.10.1.2 as 40 and 120?

A	bgp timers 40 120 neighbor 142.10.1.2
B	set timers 40 120 neighbor 142.10.1.2
C	timers 40 120 neighbor 142.10.1.2
D	neighbor 142.10.1.2 set timers 40 120
E	neighbor 142.10.1.2 timers 40 120

Question 10

Create an Access-List 10 that allows 140.108.0.0/24 network. Create a Route Map named Map_M that sets MED 150 to the IPs in this ACL. Add this Route Map to the neighbour 5.5.5.5 through out direction under BGP AS 300. What is the correct commands fot this configuration?

A	Router(config)# router bgp 300
B	Router(config-router)# neighbor 5.5.5.5 route-map Map_M out
C	Router(config-route-map)# match ip address 10
D	Router(config)# route-map Map_M permit 10
E	All of them
F	Router(config)# access-list 10 permit 140.108.0.0 0.0.0.255
G	Router(config-route-map)# set metric 150

Question 10 Explanation:

RouterB(config)# access-list 10 permit 140.108.0.0 0.0.0.255 RouterB(config)# route-map Map_M permit 10 RouterB(config-route-map)# match ip address 10 RouterB(config-route-map)# set metric 150 RouterB(config)# router bgp 300 RouterB(config-router)# neighbor 5.5.5.5 route-map Map_M out

Question 11

On Cisco Routers, according to Best Path Algorithm, secondly, path with the ...... is selected.

A	Highest MED
B	Highest Weight
C	Lowest Weight
D	Lowest Local Preference
E	Highest Local Preference

Question 12

BGP synchronization is disabled by default.

A	True
B	False

Question 13

How to create prefix-list named List_ABC for the ip addresses in 10.10.10.0/24 network?

A	ip List_ABC 10.10.10.0 255.255.255.0
B	ip prefix-list List_ABC 10.10.10.0/24
C	ip prefix-list_ABC 10.10.10.0 255.255.255.0
D	ip prefix-list 10.10.10.0/24
E	ip List_ABC 10.10.10.0/24

Question 14

If BGP is trying to initiate a TCP connection with the remote peer continuously, BGP is in ... state.

A	Active
B	Idle
C	Passive
D	Open Sent
E	Connect

Question 15

iBGP neighbors do not need to be directly connected.

A	False
B	True

Question 16

What is the correct order for BGP Path Selection for all Vendors other than Cisco?

A	Local Preference, Locally Originated, AS-Path, Origin Code, MED
B	Weight, MED, Origin Code, Locally Originated, AS-Path, Local Preference
C	Weight, Local Preference, Origin Code, MED, Locally Originated, AS-Path
D	Origin Code, Locally Originated, AS-Path, Local Preference, MED
E	Origin Code, Local Preference, MED, Locally Originated, AS-Path

Question 17

Which ones are some of the BGP Well-known Discretionary Attributes?

A	Atomic Aggregate
B	Local Preference
C	MED
D	AS Path
E	Weight

Question 18

The BGP ..... command forces the MED value to be compared, if multiple routes to same network are received via multiple routers from the same AS.

A	deterministic med create
B	deterministic-med
C	deterministic med start
D	default-med
E	default-deterministic-med

Question 19

The ..... attribute identifies the originating source of the route.

A	Weight
B	Origin
C	AS Path
D	Local Preference
E	MED

Question 20

The BGP ...... command forces the MED value to be compared, when multiple routes to the same network are received via multiple routers from different AS’s, regardless of the order of routes in the BGP routing table.

A	always-compare-med
B	none of them
C	default-always-compare
D	compare-med
E	default-compare-med

Once you are finished, click the button below. Any items you have not completed will be marked incorrect. Get Results

There are 20 questions to complete.

BGP Quiz 5

BGP QUIZ 5

Latest Lessons

Latest Blog Posts

WHAT YOU WILL FIND?

COURSES

SPECIALS

MEMBERSHIP