CCIE R&S Quiz 2 ⋆ IpCisco

CCIE ENTERPRISE INFRASTRUCTURE QUIZ 2

Please wait while the activity loads.
If this activity does not load, try refreshing your browser. Also, this page requires javascript. Please visit using a browser with javascript enabled.

If loading fails, click here to try again

CONGRATULATIONS! YOU HAVE COMPLETED CCIE ENTERPRISE INFRASTRUCTURE QUIZ 2. YOU HAVE %%SCORE%% TRUE ANSWERS OUT OF %%TOTAL%% QUESTIONS. YOUR SCORE IS %%PERCENTAGE%%. %%RATING%%

Your answers are highlighted below.

Question 1

How can we configure OSPF with process id 10, with Router ID 1.1.1.1 and with a network 20.20.20.0/24 in area 0?

A	set router-id 1.1.1.1
B	router-id 1.1.1.1
C	set network 20.20.20.0/24 area 0
D	router ospf 10
E	network 20.20.20.0 0.255.255.255 area 0

Question 2

There are Four Modes of VTP. One of them is Off mode. Off Mode is supported by ....

A	VTPv1
B	All of them
C	VTPv3 and VTPv3
D	VTPv2
E	VTPv3

Question 3

In VTP .... Mode , a switch does not advertise its own VLAN configuration. It does not also synchronize its VLAN database with received advertisements.

A	Network
B	Client
C	Standalone
D	Server
E	Transparent

Question 4

How can we see all the entires in EIGRP Topology Table?

A	show eigrp topology statistics
B	show eigrp topology links
C	show ip eigrp topology
D	show ip eigrp topology details
E	show ip eigrp topology all-links

Question 5

With which two value, the Router Roles in HSRP are determined?

A	1. HSRP Priority Values 2. Interface MAC Addresses
B	1.Interface MAC Addresses 2.Interface IP Addresses
C	1. HSRP Priority Values 2. Interface IP Addresses
D	1. Interface MAC Addresses 2. HSRP Priority Values
E	1. Interface IP Addresses 2. HSRP Priority Values

Question 6

Which Transport Layer Protocols are Reliable, Use Flow Control and Congestion Control?

A	LLDP
B	UDP
C	TCP
D	RSVP
E	SCTP

Question 7

Local preference range is ....

A	From 64512 to 65512
B	From 0 to 65512
C	From 0 to 4294967295
D	From 0 to 60512
E	From 60512 to 65512

Question 8

As a Service Provider, if we allow all of our customers to use the full VLAN ranges and give them also a second 802.1Q tag to differentiate them in our network, this is called ....

A	802.1Q Tunneling
B	VLAN Association
C	VLAN Labellling
D	ISL
E	Q-in-Q

Question 9

How can we allow a MAC Address Statically on a port with port security? (MAC: 1111:2222:3333)

A	switchport mac-address 1111:2222:3333 port-security
B	port security mac 1111:2222:3333
C	port-security mac-address 1111:2222:3333
D	switchport port-security mac-address 1111:2222:3333
E	switchport mac-address 1111:2222:3333

Question 10

How can we cofigure a schedule for IP SLA for an unlimited time starting immediatelly? (IP SLA Operation Number=50)

A	ip sla schedule 10 life forever start-time now
B	ip sla schedule 10 life unlimited start-time now
C	ip sla schedule 10 life unlimited start-time immediate
D	ip-schedule 10 life forever start-time now
E	ip sla-schedule 10 life unlimited start-time immediate

Question 11

What is the Default Load Balancing mechanism used by GLBP?

A	Extended-robin
B	Weighted
C	Round-robin
D	Host-dependent
E	Server-dependent

Question 12

L1 CSNPs are sent to all Level-1 ISs Multicast address .... L2 CSNPs are sent to all Level-2 ISs Multicast address ....

A	49-00-C2-00-00-4 / 49-00-C2-00-00-5
B	01-00-C2-00-00-14 / 01-00-C2-00-00-15
C	01-80-C2-00-00-14 / 01-80-C2-00-00-15
D	49-80-C2-00-00-1 / 49-80-C2-00-00-2
E	49-80-C2-00-00-14 / 49-80-C2-00-00-15

Question 13

MLDv2 Reports are sent to .... IPv6 address.

A	FF02::12
B	FF02::15
C	FF02::16
D	FF02::13
E	FF02::10

Question 14

If there is no Option field IPv6 header is ..... bytes long.

A	4 bytes
B	20 bytes
C	24 bytes
D	40 bytes
E	10 bytes

Question 15

Which ones are in MPLS Control Plane?

A	FIB
B	LIB
C	LFIB
D	RIB
E	All of them

Question 16

.... forwards IP packets. .... forwards Labelled IP packets.

A	LFIB / FIB
B	LIB / FIB
C	LIB / RIB
D	FIB / LFIB
E	FIB / LIB

Question 17

With .... we can use a different STP instance for each VLAN. Each STP instance can have different root switch and blocked ports.

A	STP
B	MST
C	PVST+
D	RSTP
E	All of them

Question 18

For best effor traffic, what is the first 3 bits of DSCP?

A	010
B	000
C	100
D	110
E	001

Question 19

What is the metric of the best route to reach a network in EIGRP Terminology ? (This route is also in the Routing Table)

A	Feasible distance
B	Feasible successor
C	Best distance
D	Advertised distance
E	Sccessor

Question 20

How can we display HSRP state changes?

A	debug hsrp details
B	debug ip hsrp
C	debug standby
D	debug redundancy
E	debug hsrp

Question 21

What is the AD for EIGRP Summary Routes?

A	5
B	90
C	5
D	170
E	70

Question 22

What is the range of 32 bits AS number?

A	64536-65536
B	0-4294967295
C	65536-4294967295
D	60536-65536
E	0-65536

Question 23

Which multicast group is assigned to specific protocols?

A	224.0.0.0 - 224.255.255.255
B	224.0.0.0 - 224.0.0.255
C	229.0.0.0 - 230.255.255.255
D	224.0.0.0 - 239.255.255.255
E	229.0.0.0 - 230.0.0.255

Question 24

.... is an IPv6 Tunneling technique that IPv4 and IPv6 addresses come from an ISP.

A	ISATAP
B	Teredo
C	6RD
D	NAT64
E	Dual Stack

Question 25

How can we check all the errors are in all the interfaces?

A	show errors
B	show interface counters errors
C	show counters errors
D	show counters errors all
E	show interface errors

Question 26

Which ones are true for VRRP?

A	Default VRRP Priority is 150
B	Uses Multicast address 224.0.0.18
C	All of them
D	VRRP MAC 0000.5e00.01xx
E	A Router supports up to 255 VRRP Groups

Question 27

How to clear NetFlow statistics on Cisco routers?

A	request ip flow stats clear
B	delete ip flow stats
C	clear ip flow stats
D	clear ip stats
E	delete flow stats

Question 28

Which ones are true for RIPv2?

A	Classless protocol
B	Path-vector protocol
C	Distance-vector protocol
D	Uses plain-text or MD5 authentication
E	Uses Cost as Metric

Question 29

If BGP is waiting for a TCP connection with the remote peer, what is this state?

A	Connect
B	Idle
C	Open Sent
D	Established
E	Open Confirmed

Question 30

Which BGP attributes must be supported by every BGP implementation?

A	All of them
B	Well-known Attributes
C	Optional Attributes
D	Transitive Attributes
E	Non-transitive Attributes

Question 31

LDP ...... are sent for Error.

A	PATH Messages
B	Session messages
C	RESV Messages
D	Notification messages
E	Discovery messages

Question 32

Which IPv6 address is the all-router multicast group?

A	FF02::1
B	FFFF::2
C	FFFF::1
D	FF02::3
E	FF02::2

Question 33

Which ones are True abot AD and FD in EIGRP Terminology?

A	Advertised Distance (AD): To Neighbor or from neighbor to destination distance.
B	Advertised Distance (AD): Neighbor to the destination Distance.
C	Advertised Distance (AD): To Neighbor plus, from neighbor to destination distance.
D	Feasible Distance (FD): To Neighbor plus, from neighbor to destination distance.
E	Feasible Distance (FD): Neighbor to the destination Distance.

Question 34

How can we reset all lldp records on Cisco routers?

A	delete lldp
B	delete lldp counters
C	clear lldp
D	clear lldp counters
E	delete lldp statistics

Question 35

Which ones are the PPPoE Session Establishment States?

A	Discovery Stage
B	Session Stage
C	Connect Stage
D	Keepalive Stage
E	Termination Stage

Question 36

When is a Topolgy change sent in STP Operation?

A	If a TCN is received by a Designated Port
B	If a switch becomes the root switch
C	If a port go to the Forwarding state and the switch has at least one Designated Port
D	All of them
E	If a port moves from Forwarding to Blocking

Question 37

Which ones are true for OSPF?

A	Uses Disjkstra Algorithm
B	A link-state protocol
C	A hybrid protocol
D	Uses DUAL Algorithm
E	Hierarchical protocol

Question 38

How can we confiure a Cisco router in OSPFv3 Stub Area 5? (OSPF Process Number = 10)

A	Router(config)# router ospf 10 Router(config-router)# area 5
B	Router(config)# ipv6 router ospf 10 Router(config-router)# area 5 stub
C	Router(config)# ospf 10 Router(config)# area 5 stub
D	Router(config)# ipv6 router ospf 10 Router(config-router)# area stub
E	Router(config)# ipv6 ospf 10 Router(config)# area 5 stub

Question 39

How can we permit HTTP traffic coming from 192.168.50.0/30 to any host with an ACL? (ACL Number 105)

A	extended access-list 105 deny tcp 192.168.50.0 0.0.0.3 any 80
B	ip access-list 105 permit tcp 192.168.50.0 0.0.0.3 any 80
C	access-list 105 permit tcp 192.168.50.0 0.0.0.255 any eq 80
D	access-list 105 permit tcp 192.168.50.0 0.0.0.3 any eq 80
E	ip extended access-list 105 deny tcp 192.168.50.0 0.0.0.255 any 80

Question 40

IGMP Proxy Operation Steps are given below. What is the Correct Order of this Oepration? a. Receivers Responds to IGMP Query. b. A single IGMP Report sent to the Querier. c. Querier Sends IGMP Query. d. IGMP Proxy forwards IGMP Query to all ports.

A	a-b-c-d
B	c-d-a-b
C	d-b-c-a
D	a-d-b-c
E	d-c-a-b

Question 41

How can we configure EtherChannel Protocol?

A	EtherChannel { pagp \| lacp }
B	Port-Channel { pagp \| lacp } run
C	channel-protocol { pagp \| lacp } enable
D	Port-Channel set { pagp \| lacp }
E	channel-protocol { pagp \| lacp }

Question 42

Which part of the ToS Field of an IP Packet is used for IP Precedence?

A	Last 5 Bits
B	First 4 Bits
C	Middle 3 Bits
D	First 3 Bits
E	Last 5 Bits

Question 43

If we have four route to a destination with IS-IS, External EIGRP and External BGP, which one is selected as Best Route and stored in Routing Table?

A	External EIGRP
B	IS-IS
C	External BGP and External EIGRP
D	External BGP
E	All of them

Question 44

What ones are the types of Cisco IOS firewalls?

A	Zone-Based Policy Firewall
B	Area-Based Policy Firewall
C	Classic Cisco IOS Firewall
D	Anhanced Policy Firewall
E	Extended Cisco IOS Firewall

Question 45

Which command must we use under OSPFv3 process to restart with non stop data forwarding?

A	non-stop restart
B	reboot
C	restart
D	graceful-restart
E	non-stop reboot

Question 46

In IS-IS, .... and .... packets are used to synchronize IS-IS Link-State Databases.

A	LSA
B	LSP
C	PSNP
D	CSNP
E	BPDU

Question 47

Which one(s) is/are a standard based First Hop Redundancy Protocol?

A	HSRP
B	IGMP
C	GLBP
D	RSTP
E	VRRP

Question 48

Default OSPF Hello time is .... seconds and Dead time is .... seconds for broadcast and poimnt-to-point interfaces.

A	20 / 80
B	50 / 200
C	15 / 60
D	10 / 40
E	30 / 120

Question 49

How can we adjuct BGP Keepalive and Hold time timers for neighbor 142.10.1.2 as 40 and 120?

A	neighbor 142.10.1.2 set timers 40 120
B	timers 40 120 neighbor 142.10.1.2
C	neighbor 142.10.1.2 timers 40 120
D	set timers 40 120 neighbor 142.10.1.2
E	bgp timers 40 120 neighbor 142.10.1.2

Question 50

What is the name of the problem solving approach beginning from the physical layer of OSI model?

A	Divide and conquer
B	Bottom up
C	Spot difference
D	Follow path
E	Top down:

Once you are finished, click the button below. Any items you have not completed will be marked incorrect. Get Results

There are 50 questions to complete.

gokhankosem

Gokhan Kosem is a Network Engineer, Instructor and the Founder of IPCisco.com with 15+ years of experience in Cisco, Nokia, Huawei, Juniper, Linux, Service Provider Networks, Routing and Switching technologies.

He has worked on the backbone networks of major service providers and network vendors including Nortel, Alcatel-Lucent (Nokia) and has extensive hands-on experience with Cisco, Huawei, Juniper and Nokia networking technologies.

He has trained thousands of networking students worldwide through IPCisco.com, Udemy, books, labs, quizzes, and educational content across multiple social media platforms.

IPCisco.com | Best Route to Your Dreams

A	EtherChannel { pagp \| lacp }
B	Port-Channel { pagp \| lacp } run
C	channel-protocol { pagp \| lacp } enable
D	Port-Channel set { pagp \| lacp }
E	channel-protocol { pagp \| lacp }

CCIE R&S Quiz 2

CCIE ENTERPRISE INFRASTRUCTURE QUIZ 2

Latest Lessons

Latest Blog Posts

WHAT YOU WILL FIND?

COURSES

SPECIALS

MEMBERSHIP