In this lesson, we will talk about HDLC configuration on Huawei Routers. For our HDLC Configuration example, we will use the below basic topology:
Orderly, we will do the below configuration for our HDLC Configuration Example:
1) Enabling HDLC
2) Verifying HDLC
Let’s start to configure HDLC for this topology.
You can download this configuration on Huawei eNSP Labs Page.
Table of Contents
Enabling HDLC
In this basic HDLC Configuration Example, firstly we will configure the serial interfaces to use HDLC. After that, we will assign the ip address of this interface with its subnet mask. We will do this configuration on Router 1 firstly.
system-view
[Huawei-Router-1] interface Serial 0/0/0
[Huawei-Router-1-Serial0/0/0] link-protocol-hdlc
Warning : The encapsulation protocol of the link will be changed
Continue? [Y/N] : y
[Huawei-Router-1-Serial0/0/0] ip address 192.168.1.1 30
[Huawei-Router-1-Serial0/0/0] quit
Now, let’s configure Router 2 like above.
Gokhan Kosem is a Network Engineer, Instructor and the Founder of IPCisco.com with 15+ years of experience in Cisco, Nokia, Huawei, Juniper, Linux, Service Provider Networks, Routing and Switching technologies.
He has worked on the backbone networks of major service providers and network vendors including Nortel, Alcatel-Lucent (Nokia) and has extensive hands-on experience with Cisco, Huawei, Juniper and Nokia networking technologies.
He has trained thousands of networking students worldwide through IPCisco.com, Udemy, books, labs, quizzes, and educational content across multiple social media platforms.
IPCisco.com | Best Route to Your Dreams
Leave a Reply