CCNP SWITCH Quiz 2 ⋆ IpCisco

CCNP SWITCH QUIZ 2

Please wait while the activity loads.
If this activity does not load, try refreshing your browser. Also, this page requires javascript. Please visit using a browser with javascript enabled.

If loading fails, click here to try again

CONGRATULATIONS!

YOU HAVE COMPLETED CCNP SWITCH QUIZ 2.

YOU HAVE %%SCORE%% TRUE ANSWERS OUT OF %%TOTAL%% QUESTIONS.

YOUR SCORE IS %%PERCENTAGE%%.

%%RATING%%

Your answers are highlighted below.

Question 1

How can we select ports from fa0/10 to fa/13 to configure? (Select two)

A	interface range fa0/10-14
B	interface range fa0/10 fa0/11, fa0/12, fa0/13, fa0/14
C	interface range fa0/10-13
D	interface range fa0/10, fa0/11, fa0/12, fa0/13
E	All of them

Question 2

How can we reset all lldp records?

A	delete lldp counters
B	clear lldp counters
C	clear lldp
D	delete lldp
E	delete lldp statistics

Question 3

To mirror the traffic coming to an from vlan 50, we use below command:

A	monitor session 1 source vlan 50
B	monitor 1 source vlan 50
C	monitor 1 source vlan 50 both
D	monitor session 1 source 50 both
E	monitor session 1 source vlan 50 both

Question 4

What is true for TACACS+?

A	Need more resource
B	Unidirectional CHAP
C	UDP based
D	TCP based
E	Bidirectional CHAP

Question 5

Maximum .... ports can be grouped to form an EtherChannel.

A	8
B	20
C	12
D	10
E	15

Question 6

VRRP virtual IP address can be configured as 2.2.2.2 with the command below:

A	vrrp 1 ip 2.2.2.2
B	standby ip 2.2.2.2
C	vrrp 2.2.2.2
D	standby 2.2.2.2
E	standby 1 ip 2.2.2.2

Question 7

Which ones are existing CAT cables?

A	CAT5
B	cAT6
C	CAT7
D	All of them
E	CAT8
F	CAT5e

Question 8

If we have a 24 port switch we have .... collision domain(s).

A	3
B	0
C	20
D	24
E	1

Question 9

..... encrypts only the password for the authentication.

A	RADIUS
B	TACACS+

Question 10

Which TLVs are mandatory for LLDP?

A	System Name
B	TTL
C	Port ID
D	Chassis ID (Switch MAC)
E	All of them

Question 11

How can we assign fa1/5 as a member of VLAN 10?

A	interface fa0/5
B	switchport mode access mode
C	switchport access vlan 100
D	switchport vlan 100
E	switchport mode access

Question 12

To enable VTP prunning, we use ... command.

A	vtp pruning
B	vtp pruning enable
C	pruning enable
D	pruning run
E	vtp pruning on

Question 13

To avoid system commands to interrupt our configuration, we use ... command in the line configuration mode.

A	synchronous on
B	synchronous logging
C	logging synchronous
D	logging on
E	enable synchronous logging

Question 14

With .... we prevents an unauthorized switch to become a Root Bridge.

A	Backbonefast
B	BPDU Guard
C	Root Guard
D	BPDU Filter
E	Root Filter

Question 15

... is a Cisco proprietary VLAN Encapsulation protocol.

A	LLDP
B	NDP
C	Dot1Q
D	CDP
E	ISL

Question 16

STP processes used in MST is called ...

A	group
B	instance
C	None of them
D	unit
E	process

Question 17

To use STP, we need to enable STP on Cisco Switches.

A	False
B	True

Question 17 Explanation:

By default, STP is enable on Cisco Switches.

Question 18

Bridge ID is ... bytes long.

A	12
B	8
C	16
D	4
E	10

Question 19

How can we check Private VLANs on a Cisco switch?

A	show private vlans
B	show vlan private details
C	show private-vlan
D	show private
E	show vlan private-vlan

Question 20

Which ones are the HSRP states?

A	Disabled, Passive, Init, Learn, Listen, Exchange, Established
B	Disabled, Init, Learn, Listen, Speak, Standby, Active
C	Disabled, Passive, Init, Learn, Listen, Full
D	Disabled, Passive, Active, Init, Learn, Listen, Full
E	Disabled, Init, Learn, Listen, Passive, Active

Once you are finished, click the button below. Any items you have not completed will be marked incorrect. Get Results

There are 20 questions to complete.

CCNP SWITCH Quiz 2

CCNP SWITCH QUIZ 2

Latest Lessons

Latest Blog Posts

WHAT YOU WILL FIND?

COURSES

SPECIALS

MEMBERSHIP