IPSec VPN Configuration On Huawei

huawei-ipsec-configuration-example

In this lesson we will see IPSec VPN Configuration On Huawei Routers. IPSec configurations has some basic steps.

 

These steps are given below:

  • IPSec Authentication and Encryption Configuration
  • IPSec Policy Configuration
  • IPSec Interface Association
  • IPSec Configuration Verification

 

For our Huawei IPSec VPN Configuration, we will use the below basic topology.


huawei-ipsec-configuration-example
Now, let’s start the configuration on each router.

 


You can download this configuration on Huawei eNSP Labs Page.


 

IPSec Authentication and Encryption Configuration

 

Firstly, we will configure authentication and encription mode. To do this, we will enter the “ipsec proposal tran” command. Our authentication algorithm will be SHA-2 and we will use AES as encryption algorithm. Firstly we will configure Router 1.

 

[Huawei-Router1] ipsec proposal tran
[Huawei-Router1-ipsec-proposal-trans1] esp authentication-algorithm sha2
[Huawei-Router1-ipsec-proposal-trans1] esp encryption-algorithm aes
[Huawei-Router1-ipsec-proposal-trans1] quit

 

Then, we will configure IPSec with the same commands on Router 2 too.

 

[Huawei-Router2] ipsec proposal tran
[Huawei-Router2-ipsec-proposal-trans1] esp authentication-algorithm sha2
[Huawei-Router2-ipsec-proposal-trans1] esp encryption-algorithm aes
[Huawei-Router2-ipsec-proposal-trans1] quit

 

Other IPSec VPN Lessons:

IPSec VPN – IPSec VPN Overview
IPSec VPN – IPSec VPN Configuration on Huawei Routers

Lesson tags: HCNA, Huawei, IPSec VPN
Back to: HCNA > GRE and IPSEC VPN

Leave a Reply

Your email address will not be published. Required fields are marked *

Contact

  • info@ipcisco.com
IPCisco is the Winner! “Best Certification Study Journey of 2019!”

Cisco-ITBlogAwards-2019-Winner-IPCisco-k

HCNA