OSPF (Open Shortest Path First) is a Link-State Routing Protocol. It is also Classless and an Open, Standard Protocol used by all vendors. OSPF uses Dijsktra Algortihm, a Shortest Path First Algorithm (SPF) to determine the best path to a destination network. In this lesson, we will focus on Open Shortest Path First and we will learn the details of this Routing Protocol.
Open Shortest Path First provides neighborship between other OSPF routers by the help of OSPF messages. With these messages, different tables are built. And Open Shortest Path First routing mechanims works with these tables. Basically, there are three tables. These tables are :
In Open Shortest Path First, all routers build its own Topology Table and has the full view of the network. It calculates the next hope independently from other routers. This is also the characteristic of Link-State Protocol. As you remember, Link-State protocols are “OSPF” and “IS-IS“. In Distance-Vector protocols, the situation is not like this. Distance-Vector protocols needs a neighbor to know about the network.
Open Shortest Path First has an hierarchical architecture. It uses “Areas” for hieararcy. There is a Backbone Area as Area 0 in the center for all OSPF Networks. Around this Backbone Area, Area 0, there are some other Areas. All these areas are connected to this Area 0. If there is a uncontinuous structure, Virtual-Links can be used to connect an area to the Backbone Area(Area 0).
With this hierachical architecture of OSPF, you can divide your network into different small areas and by doing this, you can reduce overhead of this small areas. You can also use specific areas in OSPF network. These areas will be explain detailly later.
Here, let’s only give the area types used in OSPF:
We will talk about the details of these areas in the following articles.
In OSPF Design there are different Router types. These router types are named according to their roles and their place of the network. Let’s see these router:
For Best Path selection, Administrative Distance(Preference) values are very important. Every Routing Protocol has an AD value. The Administrative Distance (Preference) of the Open Shortest Path First is 110 for Cisco devices. This is a little different for Alcatel-Lucent, Huawei and Juniper devices. They use Interneal and External Preference values for Open Shortest Path First. Preference value is 10 for Internal OSPF Routes and 150 for External OSPF Routes on the devices of these vendors.
Open Shortest Path First uses path Cost as its metric. Generally Bandwidth value is used as path Cost. AS a formula, the Cost is calculated like below in OSPF:
Cost = Reference BW(default 10 000 000) / BW
Protocols are developed and then they enhanced with new features. This new enhanced versions came with new versions. Open Shortest Path First also has different versions. There are two OSPF versions. These are:
OSPFv2 is the first version of Open Shortest Path First and it is used with IPv4.
OSPFv3 is the enhanced version of OSPFv2 that supports and designed for IPv6.
In the below table, you can check the differences of these two versions as summary.
In this article, we have talked about an overview of OSPFv2. In the following articles, we will explain this lesson more deeply. If you want to learn more about OSPFv3, you can check IPv6 Routing Protocols lesson.