COURSES
SPECIALS
BLOG
MEMBERS
SHOP
ABOUT
- About
- Contact
- References
- Donation
ENROLL HERE

COURSES
SPECIALS
BLOG
MEMBERS
SHOP
ABOUT
- About
- Contact
- References
- Donation
ENROLL HERE

STP Operation Quiz

Please sign up for the course before taking this quiz.

1. Why is STP Portfast used?
2
- redundant connection on port that hosts are connected
- speed up convergence on port that hosts are connected
- speed up convergence on port that other switches are connected
- redundant connection on port that other switches are connected
2. Which one is selected as STP Root Bridge, and Why?
2
stp-root-bridge-selection
- Switch 3 / Lower Bridge ID
- Switch 1 / Lower Bridge ID
- Switch 1 / Higher Bridge ID
- Switch 3 / Higher Bridge ID
3. Which Ones are STP Port Roles?
2
- Root
- Designated
- Blocked
- Alternate
4. Which states are bypassed with Portfast?
1
- Forwarding State
- Listenning State
- Learning State
- Blocking State
5. What is the Default Bridge Priority?
2
- 32768
- 100
- 1
- 65536
6. The ports of a Root Bridge in STP domain, are all in Designated ports.
1
- True
- False
7. ….. is the STP mechanims that prohibits an undesired switch to become a root bridge.
2
- BPDU Guard
- BPDU Filter
- Root Guard
- Loop Guard

MST (Multiple Spanning Tree)

Spanning Tree Protocol

Back to: STP Operation

CCNP Enterprise 350-401 ENCOR v1.1

Previous
Next

Collapse

Expand

IPv4
IPv4 Subnetting
Private IPv4 Address Ranges
APIPA Addresses
IPv4 Addressing
IPv6
IPv6 Addressing
IPv6 Link Local Addresses
IPv6 Neighbour Discovery Protocol
IPv6 Floating Static Routing
IPv6 Address Types
IPv6 Configuration Example on Packet Tracer
IPv6 and Subnetting
ICMP and ARP
Ping Command
Gratuitous ARP
Proxy ARP
ICMP (Internet Control Message Protocol)
Address Resolution Protocol (ARP)
Routing Fundamentals
IPv6 Static Route Configuration on Cisco IOS
Policy Based Routing (PBR)
Static Route Configuration on Cisco Routers
IPv6 Routing Protocols
Dynamic Routing Protocols
IP and Layer 3 Overview
RIP
RIPng Configuration Example on Cisco IOS
RIP Configuration With Packet Tracer
RIPng (RIP Next Generation)
Routing Information Protocol (RIP)
EIGRP
EIGRP (Enhanced Interior Gateway Routing Protocol)
EIGRP vs OSPF
EIGRP Tables
EIGRP Packet Types and Neighbourship
Key Configurations on EIGRP
EIGRP Configuration With Packet Tracer
EIGRP for IPv6
EIGRP For IPv6 Configuration On Cisco IOS
OSPF
OSPF Virtual-Link Configuration On Packet Tracer
OSPF Passive Interface
LSDB (Link State Database)
OSPF Area Border Router (ABR) and ASBR
OSPF Cost and Shortest Path First
OSPF NSSA and Totally NSSA on Cisco Packet Tracer
OSPF Stub Area and Totally-Stub Area on Cisco Packet Tracer
OSPF External Routes on Cisco Packet Tracer
OSPF Standard Area and Backbone Area on Cisco Packet Tracer
OSPFv3 Configuration Example on Cisco IOS
OSPFv3 (Open Shortest Path First Version 3)
Cisco Single Area OSPF Configuration
Other OSPF Key Points
OSPF Network Types
OSPF Area Types
OSPF LSA Types
OSPF Packet Types
OSPF Adjacency
OSPF(Open Shortest Path First) Overview
BGP
BGP Next Hop Self Command
BGP Multi Hop Command
BGP Neighbor Update-Source
Cisco eBGP Configuration on GNS3
BGP Route Reflector
Cisco BGP Route Reflector Configuration on GNS3
BGP Path Attributes - MED
BGP Path Attributes - Origin
BGP Path Attributes - AS Path
BGP Path Attributes - Local Preference
BGP Path Attributes - Weight
BGP Configuration Example on Packet Tracer
BGP AD and BGP Path Attributes
IBGP and EBGP
BGP Peers, BGP Sessions, BGP Messages
BGP (Border Gateway Protocol)
Layer 2 Technologies
PPPoE Configuration With Packet Tracer
Metro Ethernet Overview
Frame-Relay Configuration with both Inverse-ARP and Frame-Relay Map
Frame Relay Point-to-Point Configuration
Multipoint Frame Relay Configuration
Point-to-Point Protocol over Ethernet (PPPoE)
HDLC and PPP
PPP Configuration on Cisco
VPN Technologies
VPN Types and Protocols of VPN
DHCP and DNS
Cisco DHCP Relay Agent Configuration with GNS3
Stateless Address Auto Configuration
DHCPv6 Overview
EtherChannels
Etherchannel Cisco PAgP Configuration on GNS3
PAgP Configuration Example
LACP Configuration on Cisco IOS
Link Aggregation Control Protocol
NAT
PAT Configuration with Packet Tracer
NAT (Network Address Translation)
Static NAT Configuration with Packet Tracer
Dynamic NAT Configuration with Packet Tracer
Access Lists
Extended ACL Cisco Configuration
Access Control Lists for Traffic Control
Standard ACL Configuration With Packet Tracer
Security
DHCP Snooping Configuration on Packet Tracer
REST API Security
Cisco 802.1x Configuration
WebAuth (Web Authentication)
What is DHCP Snooping?
Access Control Lists
Control Plane Policing (CoPP)
Basic Cisco Router Security Configuration
SNMP
SNMP Configuration On Cisco IOS
SNMP – Overview
Spanning Tree
PVST+ and Rapid PVST+Configuration on Packet Tracer
PVST+ and Rapid PVST+
MST Configuration on Cisco
MST (Multiple Spanning Tree)
STP Operation
Spanning Tree Protocol
Rapid Spanning Tree Protocol
STP Portfast Configuration on Cisco Packet Tracer
RSTP Configuration on Cisco Packet Tracer
STP Configuration on Cisco Packet Tracer
VLANs
Switch Virtual Interface Configuration on Packet Tracer
Inter VLAN Routing Configuration on GNS3
Inter VLAN Routing Configuration Example
VTP Configuration with Packet Tracer
DTP and VLAN Frame Tagging Protocols
Inter VLAN Routing with Router on Stick Topology
VLANs (Virtual Local Area Networks)
VLAN Port Assignment and VLAN Port Types
VLAN Configuration on Cisco Packet Tracer
First Hop Redundancy
HSRP Configuration on GNS3
Cisco Stateful Switchover (SSO)
GLBP Configuration on Cisco
GLBP (Gateway Load Balancing Protocol)
VRRP Configuration on Cisco
VRRP (Virtual Router Redundancy Protocol)
HSRP
First Hop Redundancy Protocols
QoS
QoS Policing and Shaping
QoS Classification and Marking
QoS
Port Monitor
ERSPAN Configuration on Packet Tracer
Remote SPAN Configuration on Packet Tracer
Local SPAN Configuration on Packet Tracer
Cisco SPAN Overview
Path Virtualization
IPSec Tunneling
Cisco IPSec VPN Configuration
Cisco Virtual Routing and Forwarding (VRF)
GRE Tunnel Overview
GRE Tunnel Configuration with Cisco Packet Tracer
Device Access Control
Cisco SSH Configuration With GNS3
TACACS+
RADIUS
Authentication, Authorization, Accounting
AAA Protocols
Multicast Protocols
Bidirectional PIM (BIDIR-PIM)
Multicast Routing
IGMPv3
PIM-SM (PIM Sparse Mode)
PIM-SSM (Source Specific Multicast)
PIM-DM (PIM Dense Mode)
PIM (Protocol Independent Multicast)
IGMP Snooping
IGMP Configuration
IGMP
Cisco SD-WAN
Cisco SD-WAN Verification
Cisco vSmart Controller Configuration
Cisco vBond Initial Configuration
Cisco SD-WAN Components
SD-WAN Architecture
Wireless Security
EAPoL (Extensible Authentication Protocol over LAN)
Pre-Shared Key (PSK)
Network Security Design
802.1x (Port Based Network Access Control)
Network Security: Cisco Threat Defense
MACsec (Media Access Control Security)
Cisco TrustSec
MAC Authentication Bypass (MAB)
IP Services
Cisco NTP Configuration
uRPF (Unicast Reverse Path Forwarding)
Precision Time Protocol (PTP)
NTP (Network Time Protocol)
Network Assurance
Cisco Syslog Server Configuration with GNS3
Cisco RESTCONF Configuration
Cisco NETCONF Configuration
NETCONF Operation Steps
NETCONF Protocol Stack
NETCONF Overview
RESTCONF
Conditional debugging
Cisco Terminal Monitor and Cisco Logging Monitor
Cisco Debug Command
Cisco IP SLA and Configuration
Flexible Netflow Configuration
Flexible Netflow
Netflow and Netflow Configuration
Automation
Chef Overview
Ansible vs Puppet vs Chef
Ansible Overview
Puppet Overview
Data Serialization Languages: JSON, YAML, XML
Network Automation Tools
Cisco SD-Access Overview
Traditional Network Management versus Cisco DNA Center
Cisco DNA Center
Cisco DNA and Intent-Based Networking (IBN)
How Network Automation Impacts Network Management
REST APIs Overview
Network Virtualization
Cisco LISP (Locator ID Separation Protocol)
Virtual Switching and Virtual Switch (vSwitch)
Container vs Virtual Machine
Virtual Extensible LAN (VXLAN)
Wireless
CAPWAP versus LWAPP
Wireless Roaming: Layer 2 and Layer 3 Roaming
LWAPP Protocol
CAPWAP Protocol
Access Point Discovery and Join Process
Other Lessons
Network Ports

Search

Latest Lessons

Binary, Hex and Decimal Conversion
Part of: CCNA 200-301 v1.1
SSID Meaning
Part of: CCNA 200-301 v1.1
Cisco Telnet Configuration: IPv4 And IPv6
Part of: CCNA 200-301 v1.1
Telnet
Part of: CCNA 200-301 v1.1
CIDR and CIDR Calculation
Part of: CCNA 200-301 v1.1
Basic Huawei Configuration Example
Part of: Huawei Configuration Course
Basic Huawei Configuration
Part of: HCIA-Datacom (HCNA)
Real Life Subnetting Example
Part of: CCNA 200-301 v1.1
Fiber Optic Cable Types
Part of: CCNA 200-301 v1.1
Cisco RESTCONF Configuration
Part of: CCNP Enterprise 350-401 ENCOR v1.1
More Lessons

Latest Blog Posts

network operating system NOS Cisco IOS, Juniper JUNOS, Nookia SR OS, Huawei VRP

Network Operating System

14 Mar, 2025

what is sfp, Small Form-factor Pluggable

SFP

22 Oct, 2024

Cisco ccna v1.1 update, new lessons, Generative AI (Artificial Intelligence), Cloud Network Management and Machine Learning

CCNA Minor Update! | CCNA 200-301 v1.1

9 Jul, 2024

cisco packet tracer download and installation on Windows, MAcOs and Linux

Cisco Packet Tracer Overview

26 Jun, 2024

how-ransomware-attack-works-ipcisco.com

Ransomware Attack

1 Dec, 2023

WHAT YOU WILL FIND?

250.000+ Students All Over The World
8.000+ Questions & Answers
100+ Lab Files & Cheat Sheets
30+ IT/Network Courses
A Real Desire To Help You
Daily Social Media Shares
%100 Satisfaction

COURSES

CISCO Courses
NOKIA Courses
HUAWEI Courses
JUNIPER Courses
PYTHON Course
KEY Courses
VIDEO Courses
UDEMY Courses

SPECIALS

All Quizes
Cheat Sheets
Configuration Files
Interview Questions
IPCisco On Social Media

MEMBERSHIP

Membership

CONTACT

Pärnu mnt. 139c – 14, 11317, Tallinn, Estonia

info@ipcisco.com

Copyright © 2018-2024 IPCisco Disclaimer Privacy Policy Distance Selling Contract