Classification and Marking in QoS

Classification and Marking in QoS

To use QoS for a traffic, firstly traffic need to be identified. With this identification, traffic types are classified and then they are marked with an understandable way by the network.

The indetification mechanism used by QoS can be divide into two important process.

These process are :

• Classification
• Marking

Now, let’s go a little depply and talk about these two important QoS Process more.



There are carious of traffic types in a network. These traffic types can be data, voice, video streaming etc. Without QoS, all these traffic types are behaved similarly. But behaving similarly to all the traffic types is not a proper way. Because, different traffic types need different threatments.

For example, voice traffic must be fast but security is in the second plane for voice traffic. Beside, pure data, ftp can be slower than a voice traffic.

Because of the fact that different types of traffics need different threatments, first of all we need to categorize the type of our traffic. Identifying and categorizing the type of the traffic is called “Classification”. After this process, we know that, we have a voice traffic, or video, or what else.

Classification process can be done by checking the different fileds of a packet. There are fields that shows the traffic types in a packet like IP Precedence,DSCP. Beside, incoming interfaces, source and destination addresses can also be used for Classification.

Classification is done close to the source. This is because, early determination of the type and threat as required through the network.

Lesson tags: QoS, classification, marking, Quality of service
Back to: CCNA > Quality of Service

Leave a Reply

Your email address will not be published. Required fields are marked *

IPCisco is the Winner! “Best Certification Study Journey of 2019!”